Question about changing my D15 from carbureted to fuel injected
09-03-2008, 02:43 PM
#1
Thread Starter
Join Date: Sep 2008
Location: Saint Marys, Ga, United States
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Question about changing my D15 from carbureted to fuel injected
So I have a fuel injected manifold from a fellow D series motor, and I want to know if I can use the same ECU and just reflash it? Lemme know if anyone has done this and what else I'll need to do.
Thnx in advanced for any answers or advice.
Thnx in advanced for any answers or advice.
09-03-2008, 02:52 PM
#2
Honda-Tech Member
Re: Question about changing my D15 from carbureted to fuel injected (MonsterRex)
look in the faqs (at the top of the civic/crx page) for the DPFI- MPFI conversion
09-03-2008, 07:27 PM
#4
Honda-Tech Member
Join Date: Oct 2004
Location: jimmysville VT,, NY, USA
Posts: 4,915
Likes: 0
Received 1 Like
on
1 Post
Re: Question about changing my D15 from carbureted to fuel injected (MonsterRex)
what kind of carb is on it now? the single or dual carb1.5x motor? you will need a new tank with the fuel injection pump and a lot of wiring if you had carbs. I would just go with a weber side draft.
09-03-2008, 08:12 PM
#5
Honda-Tech Member
Re: Question about changing my D15 from carbureted to fuel injected (Crx Jimmy)
I'm guessing he has DPFI if he's in the US, as most people assume they are carborated.
09-04-2008, 04:58 AM
#6
Thread Starter
Join Date: Sep 2008
Location: Saint Marys, Ga, United States
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Re: Question about changing my D15 from carbureted to fuel injected (grog)
Um yeah that sounds like too much effort to switch it. I'm gonna just keep the carb. Thnx everyone for the info.
Thread
Thread Starter
Forum
Replies
Last Post
