Project smooth
05-25-2007, 07:37 PM
#27
Thread Starter
Join Date: May 2007
Location: sioux falls, SD, Minnehaha
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
well i started dioin some prep for the Mpfi.
this thing was quite dirty so i got it cleaned up for the most part. I didnt get much of before pic but here it is
the whole thing looked like this before alot of scrubbing, also started to degunk the throtle body, it had a little bit of build up on it.
BEFORE
AFTER
AND OF COURSE THE LITTLE TB
this thing was quite dirty so i got it cleaned up for the most part. I didnt get much of before pic but here it is
the whole thing looked like this before alot of scrubbing, also started to degunk the throtle body, it had a little bit of build up on it.
BEFORE
AFTER
AND OF COURSE THE LITTLE TB
05-26-2007, 05:00 PM
#30
Junior Member
Join Date: Sep 2003
Location: Savannah, GA, USA
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
Re: Project smooth EF (vart)
EF_LOVE
build looks great. stop by and have a look at mine. ef love baby
boosted twm 52mm itbs, unibody full color change, wire tuck and shave
build looks great. stop by and have a look at mine. ef love baby
boosted twm 52mm itbs, unibody full color change, wire tuck and shave
05-26-2007, 08:10 PM
#31
Thread Starter
Join Date: May 2007
Location: sioux falls, SD, Minnehaha
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Project smooth First < 1 2 Last
Author Post
CBURKE
Offline
1764 posts [100%]
ZEPHRYHILLS FL
6-15-2005
« « » 3:09 PM 5/25/2007 Reply Edit
--------------------------------------------------------------------------------
^^^ uh?
Anyway, very nice.
--------------------------------------------------------------------------------
Obstacles don't have to stop you. If you run into a wall, don't turn around and give up. Figure out how to climb it, go through it or work around it. "Michael Jordan"
Ask me about : http://www.lighterfaster.com
Carbon Fiber Sun Roof Plugs, Diffusers, and Carbon Fiber Jewelry.
http://www.rcautoworks.com/
My crx build
https://honda-tech.com/zerothread?id=1724721
RedEfGoKart
Online
34 posts [100%]
sioux falls SD
5-9-2007
« « » 8:37 PM 5/25/2007 Reply Edit
--------------------------------------------------------------------------------
well i started dioin some prep for the Mpfi.
this thing was quite dirty so i got it cleaned up for the most part. I didnt get much of before pic but here it is
the whole thing looked like this before alot of scrubbing, also started to degunk the throtle body, it had a little bit of build up on it.
BEFORE
AFTER
AND OF COURSE THE LITTLE TB
--------------------------------------------------------------------------------
Chasing little cones is fun.
My project:
https://honda-tech.com/zerothread/1979324
CBURKE
Offline
1764 posts [100%]
ZEPHRYHILLS FL
6-15-2005
« « » 8:27 AM 5/26/2007 Reply Edit
--------------------------------------------------------------------------------
Try and find an Ls TB, much much bigger 60mm
--------------------------------------------------------------------------------
Obstacles don't have to stop you. If you run into a wall, don't turn around and give up. Figure out how to climb it, go through it or work around it. "Michael Jordan"
Ask me about : http://www.lighterfaster.com
Carbon Fiber Sun Roof Plugs, Diffusers, and Carbon Fiber Jewelry.
http://www.rcautoworks.com/
My crx build
https://honda-tech.com/zerothread?id=1724721
vart
Offline
858 posts [100%]
Btown ND
11-21-2004
« Re: Project smooth EF (RedEfGoKart) « » 9:14 AM 5/26/2007 Reply Edit
--------------------------------------------------------------------------------
lookin dope, don't paint the side mouldings or the bumpers.
electric_rex, your build is sick!, it looks awsome so far,
Ill be doing some paint here in the next monthe also. gotta prep the garage space first.
Author Post
CBURKE
Offline
1764 posts [100%]
ZEPHRYHILLS FL
6-15-2005
« « » 3:09 PM 5/25/2007 Reply Edit
--------------------------------------------------------------------------------
^^^ uh?
Anyway, very nice.
--------------------------------------------------------------------------------
Obstacles don't have to stop you. If you run into a wall, don't turn around and give up. Figure out how to climb it, go through it or work around it. "Michael Jordan"
Ask me about : http://www.lighterfaster.com
Carbon Fiber Sun Roof Plugs, Diffusers, and Carbon Fiber Jewelry.
http://www.rcautoworks.com/
My crx build
https://honda-tech.com/zerothread?id=1724721
RedEfGoKart
Online
34 posts [100%]
sioux falls SD
5-9-2007
« « » 8:37 PM 5/25/2007 Reply Edit
--------------------------------------------------------------------------------
well i started dioin some prep for the Mpfi.
this thing was quite dirty so i got it cleaned up for the most part. I didnt get much of before pic but here it is
the whole thing looked like this before alot of scrubbing, also started to degunk the throtle body, it had a little bit of build up on it.
BEFORE
AFTER
AND OF COURSE THE LITTLE TB
--------------------------------------------------------------------------------
Chasing little cones is fun.
My project:
https://honda-tech.com/zerothread/1979324
CBURKE
Offline
1764 posts [100%]
ZEPHRYHILLS FL
6-15-2005
« « » 8:27 AM 5/26/2007 Reply Edit
--------------------------------------------------------------------------------
Try and find an Ls TB, much much bigger 60mm
--------------------------------------------------------------------------------
Obstacles don't have to stop you. If you run into a wall, don't turn around and give up. Figure out how to climb it, go through it or work around it. "Michael Jordan"
Ask me about : http://www.lighterfaster.com
Carbon Fiber Sun Roof Plugs, Diffusers, and Carbon Fiber Jewelry.
http://www.rcautoworks.com/
My crx build
https://honda-tech.com/zerothread?id=1724721
vart
Offline
858 posts [100%]
Btown ND
11-21-2004
« Re: Project smooth EF (RedEfGoKart) « » 9:14 AM 5/26/2007 Reply Edit
--------------------------------------------------------------------------------
lookin dope, don't paint the side mouldings or the bumpers.
electric_rex, your build is sick!, it looks awsome so far,
Ill be doing some paint here in the next monthe also. gotta prep the garage space first.
05-30-2007, 04:03 PM
#34
Thread Starter
Join Date: May 2007
Location: sioux falls, SD, Minnehaha
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Does anybody have any idea if there is any difference between the D15 injectors and the injectors from an integra, b series i think. is there a difference in flow or are they the same like all other honda stuff.
05-31-2007, 05:43 AM
#35
Honda-Tech Member
Join Date: Jun 2005
Location: St.pete FL
Posts: 2,975
Likes: 0
Received 0 Likes
on
0 Posts
All Honda injectors are the same (other then the lude)
Or unless you have peak and hold OBD0 then anything after 92/93 (I think) no longer uses the res-box.
I used a set I had from my old D16A6 and put them in my B16A, all OBD0.
So in other words if you are using an OBD0 Teg injector then your fine.
Or unless you have peak and hold OBD0 then anything after 92/93 (I think) no longer uses the res-box.
I used a set I had from my old D16A6 and put them in my B16A, all OBD0.
So in other words if you are using an OBD0 Teg injector then your fine.
06-19-2007, 09:59 PM
#37
Thread Starter
Join Date: May 2007
Location: sioux falls, SD, Minnehaha
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Well i guess it is time for an update, I have been busy getting parts together.
I have all necessary parts for the MPFI swap, All FREE...
I also have a rear disk set up which will be going in when i get cash for new brakes and pads ect.
I will be painting again next week. I will paint the bumpers, front header piece, and redo the fenders, also have to paint the entire fornt end of my buddy's DA.
I have managed to get two first place finishes in the auto X points series here, and one second place non points event. in the process i toasted the NT450's that were on the car, Just got new tires in today. and have some race rubber on 13"wheels on the way. Ill get some pics as i get work done i the following weeks.
I have all necessary parts for the MPFI swap, All FREE...
I also have a rear disk set up which will be going in when i get cash for new brakes and pads ect.
I will be painting again next week. I will paint the bumpers, front header piece, and redo the fenders, also have to paint the entire fornt end of my buddy's DA.
I have managed to get two first place finishes in the auto X points series here, and one second place non points event. in the process i toasted the NT450's that were on the car, Just got new tires in today. and have some race rubber on 13"wheels on the way. Ill get some pics as i get work done i the following weeks.
07-02-2007, 06:06 PM
#40
Thread Starter
Join Date: May 2007
Location: sioux falls, SD, Minnehaha
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
It is a 25 gal 4hp craftsman. Im using a HVLP gun too. the compressor would kick in and fun but i never lost pressure while spraying. Ill have some pics up in a few min
07-02-2007, 06:39 PM
#42
Thread Starter
Join Date: May 2007
Location: sioux falls, SD, Minnehaha
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Here are the pics, first of the prep.
got rid of that stupid lisence plate mount and holes, nice and smooth now.
Getting rid of some rick chips and a big nasty scratch, little dings still in the hood but eventually going with a CF Hood.
got rid of that stupid lisence plate mount and holes, nice and smooth now.
Getting rid of some rick chips and a big nasty scratch, little dings still in the hood but eventually going with a CF Hood.
07-02-2007, 06:46 PM
#43
Thread Starter
Join Date: May 2007
Location: sioux falls, SD, Minnehaha
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Ok now for the painted shots...
when spraying clear on the hood I had a little sweat dripping off on the hood and right infront of the clear, now i have some damn bubbles in the clear, sanded them down but I know they wont go away, oh well.
when spraying clear on the hood I had a little sweat dripping off on the hood and right infront of the clear, now i have some damn bubbles in the clear, sanded them down but I know they wont go away, oh well.
07-02-2007, 06:50 PM
#44
Thread Starter
Join Date: May 2007
Location: sioux falls, SD, Minnehaha
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Now for my favorite shots...
everything from the doors up got a fresh coat of paint and clear,
BY FAR THE BEST THE CAR HAS EVER LOOKED, I
Really like the way it turned out.
everything from the doors up got a fresh coat of paint and clear,
BY FAR THE BEST THE CAR HAS EVER LOOKED, I
Really like the way it turned out.
07-07-2007, 09:08 PM
#50
Thread Starter
Join Date: May 2007
Location: sioux falls, SD, Minnehaha
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
I didnt have any rust to remove on the front of the car, as for the rust on the quarter's no havent got to it yet. that will be a fall or next spring project... I prob would have done it all at once but not enough free time, the rust repair will take more than a weekend unfortunately.