Adi Radoncic

Guys,
I need someone to do me a fawor and give me the torque specs to a d15 bottom end.

These are the specs I need:

Rod Bolts(nuts)
Crankshaft main caps with girdle Bolts
Oil Pickup
Baffle plate
Oil pump Bolts
Oil pan Bolts
Main Seal cover Bolts

Guys I need this desperately.. please help me!!!

Thanks,
Adi

phatrick2332

rod bolts- 23 ft-lbs

main caps
seperate caps-48 ft lbs

one piece cap assembly- 33 ft-lbs

oil pickup tube - 17 ft-lbs

oil pump screen bolts- 8 ft-lbs

oil pump to engine bolts- 9 ft lbs

oil pan bolts- 9 ft lbs

main seal cover bolts? i have no clue lol

hope this help you out
pat

EG8R

rear mail seal cover - 8 ft lbs

Adi Radoncic

Guys, thank you so much for this, I really needed these to finish my bottom end rebuild...

Thanks again!!

Adi

EG8R

Good luck!!!

Adi Radoncic

i need to know one more thing guys if you could please, look in the book and tell me if the bearing place ment on the one peace cap assembly matters, because right now I'm looking at it and there is ridges on both sides of the cap, does it matter where i put the bearing?? I mean does it matter on which side i put the bearing in on?

Thanks again,

Adi

phatrick2332

Im holding the book, and it doesnt say anything, the bearings are uniform and perfectly flat and round...it shouldnt matter.

Adi Radoncic

hey, i was gona post back but i got it now all it took is just looking at it.
I made an assumption way to early in the game, i didn't even look at that main cap gurdle..

Thanks for everything man...

Adi