would the ff-squad ckf (crank angle sensor) bypass trick work to pass emissions in CT?
02-27-2007, 04:56 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: your momma, usa
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
would the ff-squad ckf (crank angle sensor) bypass trick work to pass emissions in CT?
i know it barrows a signal from the CKP. but when scanned will it pass emissions? or do i have to do the sensor install?
02-28-2007, 03:58 PM
#5
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: your momma, usa
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
Re: (jz98ctr)
well my buddy knows a kid that has everything i need to add a Crank angle sensor to my jdm motor...i just have to buy an oil pump...im getting the sensor and all hardware to hook it up, timing drive gear, and the lower timing belt cover...is this all i need?
02-28-2007, 04:07 PM
#6
Re: (ricekiller1)
to run a USDM ecu you need a few other sensors...but your on the right track
read:
https://honda-tech.com/zerothread?id=906684
read:
https://honda-tech.com/zerothread?id=906684
02-28-2007, 05:24 PM
#7
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: your momma, usa
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
Re: (sicones)
this motor is the 96-97 ITR motor..do the 98+spec ITR's need all these exact modifications as well?
Modified by ricekiller1 at 1:37 AM 3/2/2007
Modified by ricekiller1 at 1:37 AM 3/2/2007
Trending Topics
03-01-2007, 04:41 PM
#9
Re: (ricekiller1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ricekiller1 »</TD></TR><TR><TD CLASS="quote">this motor is the 96-97 ITR motor..do the 98+spec ITR's need all these exact modifications as well?
Modified by ricekiller1 at 1:37 AM 3/2/2007</TD></TR></TABLE>
same exact thing
Modified by ricekiller1 at 1:37 AM 3/2/2007</TD></TR></TABLE>
same exact thing
Thread
Thread Starter
Forum
Replies
Last Post
philipwk
Honda Accord (1990 - 2002)
2
11-29-2005 07:54 PM
