Whats the eaziest way to remover the cat converter
#1
Thread Starter
Join Date: Jun 2004
Location: Americas Most Blunted, Ca/AZ
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
Whats the eaziest way to remover the cat converter
I have a 99 civic ex and Im trying to install my skunk2 shorty but i need to remove some exhaust pieces to do it. All I have is 1 adj. wrench and a metric ratchet set . After looking under my car for about 1 hour tryin to remove various exhaust peices i decided that removing the cat would be the easiest way. But there are 3 bolts and i can only get to 2. I can remove the header back bolts but the axle-back bolts aint movin for ****. I cant really get to the axle-back bolts without stripin them since my 16's are in the way and i cant remove em since the damn theives stole the wheel lock key. Any suggestions besides taking it to a shop cuz that aint an option?
#2
Re: Whats the eaziest way to remover the cat converter (Lekz)
What are you trying to install? You should be able to do a short shifter with removing teh exhaust if thats what your trying to do. Go buy some better tools.
#3
Thread Starter
Join Date: Jun 2004
Location: Americas Most Blunted, Ca/AZ
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
i jus found this write-up...he didnt remove any exhaust pieces...i hope its similar for 99-00...i doubt it
https://honda-tech.com/zerothread?id=1007935
https://honda-tech.com/zerothread?id=1007935
Thread
Thread Starter
Forum
Replies
Last Post
trader8825
Honda Civic / Del Sol (1992 - 2000)
5
03-28-2013 08:52 PM
intgraCA
Acura Integra
4
05-23-2007 04:43 PM