EM1 won't rev past 3500
#1
EM1 won't rev past 3500
basically my car has a gsr bottom and b16 head, bottom end is built for boost (cp 9:1, eagle rods, etc) well my turbo shitted out on me so I decided to throw a stock header, stock injectors, and a stock ecu on it so I could have something to drive. It drove fine for that day and the next day. I had it idling in the driveway and it all of a sudden died. Wouldn't crank back up. Put a working igniter in it, nothing. So I swapped the coils, and it started up. Okay but now it will NOT rev past 3500, it just hits limiter, aka limp mode. The CEL is on, but it will not flash when jumped. No clue why, it just will not.
short: CEL is on wont flash, cars in limp mode, what to do.
short: CEL is on wont flash, cars in limp mode, what to do.
#5
Re: EM1 won't rev past 3500
Don't own one, might be able to check tomorrow or monday however.
As I said, it will not flash so I couldn't tell you.
The coil and igniter I just swapped in are from a dizzy that was removed about a week ago working. The car ran fine literally 3 days ago..
As I said, it will not flash so I couldn't tell you.
The coil and igniter I just swapped in are from a dizzy that was removed about a week ago working. The car ran fine literally 3 days ago..
Trending Topics
#10
Re: EM1 won't rev past 3500
Well I had a stock obd2b si ecu running it the other day when it ran fine, but i tried a obd1 chipped ecu with a b16 basemap on it and it cleared it up just fine.
Thread
Thread Starter
Forum
Replies
Last Post
Granny_shifter
Honda Civic / Del Sol (1992 - 2000)
18
09-17-2012 08:08 AM
darkstormcr
Honda Civic / Del Sol (1992 - 2000)
0
06-27-2009 11:08 AM
gfuller40
Honda Accord (1990 - 2002)
3
06-05-2009 01:46 PM