Timing mark question
#3
Honda-Tech Member
Thread Starter
Re: Timing mark question
Yes i realized it after it was uploaded.
but i only ask because if thats my tdc line my cams dont point straight up they both point 11 oclock instead of 12 if you know what i mean.
but i only ask because if thats my tdc line my cams dont point straight up they both point 11 oclock instead of 12 if you know what i mean.
#6
#7
Honda-Tech Member
Thread Starter
Re: Timing mark question
just making sure i 2nd guessed myself and i got curious.
so i set my crank at tdc slip off the belt and turn the cams to tdc without the belt on ?
so i set my crank at tdc slip off the belt and turn the cams to tdc without the belt on ?
Trending Topics
#8
Re: Timing mark question
Then turn the crank pulley a couple of revolutions counterclockwise to verify that the timing is still correct. Then tension the belt.
#12
Thread
Thread Starter
Forum
Replies
Last Post
Cams are at TDC and crank is at TDC, but when I hit it with the timing gun it shows the white line l
Thrillhouse
Tech / Misc
4
08-07-2004 01:13 PM
WannaHonda
Forced Induction
5
05-06-2004 10:12 AM