mini me p28 - how pin stock ecu plug for vtec?
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2012
Location: shithole, missouri
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
mini me p28 - how pin stock ecu plug for vtec?
so im doing a mini me with a p28 and i was wondering how to pin the stock ecu plug for vtec? i have a spare intagra harness but i cant find any pins on it that look like the right one to slide into the ecu plug.
#2
B*a*n*n*e*d
Join Date: Feb 2008
Location: Charlottesville, VA, USA
Posts: 6,420
Likes: 0
Received 5 Likes
on
5 Posts
Re: mini me p28 help
https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/faq-d15-sohc-vtec-mini-me-massive-write-up-56k-goodbye-554053/
Look at step 6. You don't need to replace your harness.
Look at step 6. You don't need to replace your harness.
#3
Honda-Tech Member
Thread Starter
Join Date: Dec 2012
Location: shithole, missouri
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Re: mini me p28 help
i understand that, but at a6 and d4 i dont have any pins to pin the stock plug, i was wondering where i can find some locally or if i could use any of the teg motor harness
#4
B*a*n*n*e*d
Join Date: Feb 2008
Location: Charlottesville, VA, USA
Posts: 6,420
Likes: 0
Received 5 Likes
on
5 Posts
Re: mini me p28 help
http://www.hamotorsports.com/ecu-plugs-pins.html
You should be able to clip the proper size from your extra motor harness and solder new wires to them, or you can order a pack of 5 from HAMS at the link I just gave you. Your local dealership might have them, but I make no promises there. I doubt most parts stores would carry them.
You should be able to clip the proper size from your extra motor harness and solder new wires to them, or you can order a pack of 5 from HAMS at the link I just gave you. Your local dealership might have them, but I make no promises there. I doubt most parts stores would carry them.
Thread
Thread Starter
Forum
Replies
Last Post
meccA's eg6
Honda Civic / Del Sol (1992 - 2000)
5
07-17-2004 09:21 PM