so i want an aggressive cam, your help pls
#1
B*a*n*n*e*d
Thread Starter
Join Date: Mar 2009
Location: NorthWest indiana
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
so i want an aggressive cam, your help pls
i have a b16a and i have stage3 cams, and those cams appear to have bent my valves, so im taking those out, putting in titanium retainers and sprigs and i want to get a oem honda cam, that is more aggressive than the b16a cams, now ive heard that the gsr camshafts are pretty aggressive for the b16. is this true?
#2
Re: so i want an aggressive cam, your help pls
if its a b16 i believe that type r cams will fit due to that fact that the type r head and the b16 head are made from the same casting. as far as gsr cams i would say they will not fit in a b16 head
#3
B*a*n*n*e*d
Thread Starter
Join Date: Mar 2009
Location: NorthWest indiana
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Re: so i want an aggressive cam, your help pls
ah, i know the gsr cams will fit, just wondering if its got more lift and duration than that of a b16a cam
#4
Re: so i want an aggressive cam, your help pls
i have a b16a and i have stage3 cams, and those cams appear to have bent my valves, so im taking those out, putting in titanium retainers and sprigs and i want to get a oem honda cam, that is more aggressive than the b16a cams, now ive heard that the gsr camshafts are pretty aggressive for the b16. is this true?
Trending Topics
#9
B*a*n*n*e*d
Thread Starter
Join Date: Mar 2009
Location: NorthWest indiana
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Re: so i want an aggressive cam, your help pls
im pretty sure at the tip, the cylinder compression test is as such
cyl#1-120 psi
cyl#2-185 psi
cyl#3-100 psi
cyl#4-185 psi
so im still getting compression, just not as much as i should be getting, whatever is bent, you probably cant even see it with your eyes.
cyl#1-120 psi
cyl#2-185 psi
cyl#3-100 psi
cyl#4-185 psi
so im still getting compression, just not as much as i should be getting, whatever is bent, you probably cant even see it with your eyes.
#12
B*a*n*n*e*d
Thread Starter
Join Date: Mar 2009
Location: NorthWest indiana
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
#13
Honda-Tech Member
Re: so i want an aggressive cam, your help pls
cuz not everything that ppl say is true.
I remember when i got my vitara pistons and i went to my friends-fathers-friends-shop (LOL) becuase hes supposedly very good, and hes like YA VITARA PISTONS ARE ****, anything aluminum is ****, ACL bearings are the most **** bearings ever, unless your giong to sleeve and balance the motor and used forged pistons i wont even build that piece of ****. So im like ok well **** YOU becuase your AN IDIOT, and have a nice day. And i walked out. Took it to another shop who was like "ya i build a bunch of vitara builds, they seem to be pretty solid, nobody has complained yet, even though they are aluminum pistons". SO ya.
#14
Honda-Tech Member
Join Date: Aug 2006
Location: Wilmington, NC
Posts: 1,780
Likes: 0
Received 0 Likes
on
0 Posts
Re: so i want an aggressive cam, your help pls
Gsr cams will fit in a b16 head and will make alil more power (especially down low) on a na b16 and will make alot more power on a turbo'd b16. You must use DUAL valve springs on a type r cam (exhaust side only because you already got em on the intake) or for stage 3 cams. Vitara FTW!!!
#15
Honda-Tech Member
Re: so i want an aggressive cam, your help pls
Gsr cams will fit in a b16 head and will make alil more power (especially down low) on a na b16 and will make alot more power on a turbo'd b16. You must use DUAL valve springs on a type r cam (exhaust side only because you already got em on the intake) or for stage 3 cams. Vitara FTW!!!
#18
Honda-Tech Member
Join Date: Dec 2005
Location: Toronto, ON, Canada
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
Re: so i want an aggressive cam, your help pls
SRS=safety restraint system jk aside...
anyways if you dont want to rebuild the head, then look into some ctr/2000-01 ITR intake cam and all years ctr and itr exhaust cam.
i have a set of itr's and can ship free and ill even add $100 for those stage 3's.
pics WILL be included and i expect the same from your end too
anyways if you dont want to rebuild the head, then look into some ctr/2000-01 ITR intake cam and all years ctr and itr exhaust cam.
i have a set of itr's and can ship free and ill even add $100 for those stage 3's.
pics WILL be included and i expect the same from your end too
Thread
Thread Starter
Forum
Replies
Last Post