neutral safety or interlock switch MISSING!?
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2007
Location: knoxville, tn, USA
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
neutral safety or interlock switch MISSING!?
A while ago my little crayon looking piece broke off. So I put a bolt in it's place and it works fine. I come to find my car won't start.
Look down there. The bolt is gone.
The switch is missing!
I think I might be suffering from temporary blindness. Anyone have a pic of what this thing looks like?
Look down there. The bolt is gone.
The switch is missing!
I think I might be suffering from temporary blindness. Anyone have a pic of what this thing looks like?
#2
Ferio Wdm Edition
Re: neutral safety or interlock switch MISSING!?
Its just a little black piece. I did auto to manual swap, and it didnt come with that rubber/plastic piece, so i used a bolt and nut. No problems or issues.
#3
Honda-Tech Member
Thread Starter
Join Date: Feb 2007
Location: knoxville, tn, USA
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Re: neutral safety or interlock switch MISSING!?
I'm retarded. It's up further than i thiught it was I was looking at the cruise control switch
#4
Ferio Wdm Edition
Re: neutral safety or interlock switch MISSING!?
Lol, well they both have that plastic rubber thing, i used a nut and bolt On both..and also the clutch switch, and cruise switch look the same. iirc, the clutch switch is slighter bigger than the cruise switch, do You need a pic of The 2 switches?
#5
Re: neutral safety or interlock switch MISSING!?
yeah when those rubber pads break they all break right after another and disintegrate, probably should replace the brake light one too, or you'll have the lights on all the time.
#7
Honda-Tech Member
Thread Starter
Join Date: Feb 2007
Location: knoxville, tn, USA
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Re: neutral safety or interlock switch MISSING!?
Yeah, I actually just checked and realized what I replaced was the brake light one. This clutch switch is going to be a bitch to get to.
Trending Topics
#8
Ferio Wdm Edition
Re: neutral safety or interlock switch MISSING!?
Ur better off using a nut and a bolt...it will never come out if its tightened enough. Dont even stress man
#9
Honda-Tech Member
Thread Starter
Join Date: Feb 2007
Location: knoxville, tn, USA
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Re: neutral safety or interlock switch MISSING!?
Welp. No bolt that fits any nuts I have sadly. I jbwelded two pennies.
Getting the clutch level bolt out was a pita!! Mainly because of harnesses in the way that I couldn't figure out how to remove. Putting them back in was easy peasy. Works a treat now!
Getting the clutch level bolt out was a pita!! Mainly because of harnesses in the way that I couldn't figure out how to remove. Putting them back in was easy peasy. Works a treat now!
#10
Re: neutral safety or interlock switch MISSING!?
JBweld should hold up better than my tape and penny trick, it worked for 6mo, but every so often it would slide down a bit and I couldn't start my Integra.
Thread
Thread Starter
Forum
Replies
Last Post
ke98248
Honda Civic / Del Sol (1992 - 2000)
28
06-11-2007 08:49 AM