TurboKitty@1

It runs great, but it seems like the clutch is having a hard time engaging or something. It shifts into each gear w/o any grinding, but when I release the clutch it takes a few seconds to shift into the gear. Almost like the pedal is getting stuck but slowly goes into gear. Any Ideas?

B_Swapped93

so it's slow to "catch" does it feel like it's slipping ?

TurboKitty@1

Yeah like pedal gets stuck coming back from the floor and doesn't fully engage. But every gear stays in, no grinds or anything.

B_Swapped93

check to see if there is a leak at the top of the clutch pedal where it connects to the CMC(clutch master cylinder). then see if the slave cylinder is leaking it's mounted on the tranny. 3rd thing I can think of is the clutch pedal free play is not adjusted properly.

TurboKitty@1

Well I just bought it. The guy replaced the master and slave cylinders and said it was doing it prior to the replacements. I dont see any leaks near either.

TurboKitty@1

Somebody told me that it could just need to be bled again. Someone else said its definitely a clutch. So Im not sure which way to lean.

TurboKitty@1

Nobody else?