jdm gsr in 95 ex coupe crank but no start after tps calibration
#51
Re: jdm gsr in 95 ex coupe crank but no start after tps calibration
Getting injectors cleaned after work tonite. Will do a compression test also. Fuel pressure seems good.
@soch-civic yeah let me know. Hopefully its just clogged injectors lol.
@soch-civic yeah let me know. Hopefully its just clogged injectors lol.
#52
Honda-Tech Member
Re: jdm gsr in 95 ex coupe crank but no start after tps calibration
Hey I need some help I have 95 gsr. Put a turbo kit head gasket cometic arp head studs.edelbrock victor x manifold rc 750cc injectors skunk2 fuelrail fuel rugulator fuel pressure gauge.and skunk2 throttle body p28 ecu I alap have the s300 but I want to turn the cat on with the p28 first...and also cam gears with the gsr cams..255 fuelpump walbroo..I have checked almost evening I think I have spark and fuel is going three gauge reads 30.. New dizzy..spark plugs new..main relay I tried a new one and same thing it turns on for a second and then back off I give out had and out turn off also..get I get some help I can't think of anything alse that I could do to fix the problem
#53
Honda-Tech Member
Re: jdm gsr in 95 ex coupe crank but no start after tps calibration
Hey I need some help I have 95 gsr. Put a turbo kit head gasket cometic arp head studs.edelbrock victor x manifold rc 750cc injectors skunk2 fuelrail fuel rugulator fuel pressure gauge.and skunk2 throttle body p28 ecu I alap have the s300 but I want to turn the cat on with the p28 first...and also cam gears with the gsr cams..255 fuelpump walbroo..I have checked almost evening I think I have spark and fuel is going three gauge reads 30.. New dizzy..spark plugs new..main relay I tried a new one and same thing it turns on for a second and then back off I give out had and out turn off also..get I get some help I can't think of anything alse that I could do to fix the problem
#55
Re: jdm gsr in 95 ex coupe crank but no start after tps calibration
Quick question. I have a set of z6 injectors and was wondering if those would work sense my gsr is obd1 also.
And yes I have checked all my fuses and they are good.
And yes I have checked all my fuses and they are good.
#59
Honda-Tech Member
Join Date: Aug 2011
Location: Fontana ca
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
Re: jdm gsr in 95 ex coupe crank but no start after tps calibration
do you have power at the black yellow wire at the dizzy? if no power. replace ignition switch. also open up your dizzy and make sure everything is tights. the terminals on the icm and coil.
#61
Honda-Tech Member
Re: jdm gsr in 95 ex coupe crank but no start after tps calibration
I found what was wrong with my car the iavc thing wasn't connected right I have the iavc and the map sensor mixed up..and the cat should turn on with 750cc.. And stay on maybe ruin stupid but it will turn on..
I also don't know how to make a new thread sorry about that..and thanks for your help
I also don't know how to make a new thread sorry about that..and thanks for your help
#62
Honda-Tech Member
Re: jdm gsr in 95 ex coupe crank but no start after tps calibration
I also have another problem there's a lot of white smoke coming out of my turbo it smells like gas..could it be because of the rc 750cc injectors and cuz its not tune yet?
#66
B*a*n*n*e*d
Join Date: Feb 2008
Location: Charlottesville, VA, USA
Posts: 6,420
Likes: 0
Received 5 Likes
on
5 Posts
Re: jdm gsr in 95 ex coupe crank but no start after tps calibration
You went from 750cc/min injectors, down to 240cc/min injectors? Get that car to a damn tuner before you blow it up. If you're only getting 30PSI at the fuel rail, you're severely under-fueling the motor.
#67
Re: jdm gsr in 95 ex coupe crank but no start after tps calibration
No. That was some dude that didn't make his own thread. The only mods the car has is an intake an a exhaust.
Thread
Thread Starter
Forum
Replies
Last Post
moyospeed
Honda Civic / Del Sol (1992 - 2000)
11
06-09-2016 04:25 PM
TacoLover
Honda Civic (2001 - 2005)
13
05-30-2011 05:19 AM