Help: del sol/D16y8 swap - won't rev past 4k rpm after replacing distributor
#1
Honda-Tech Member
Thread Starter
Help: del sol/D16y8 swap - won't rev past 4k rpm after replacing distributor
So I bought a 95 del sol and when I had got it it was driving fine pulled strong
Drove it home. 2 hours later died on the freeway and didn't wanna turn on.
The guy had done obd2 to obd1 wiring for the motor ?
I changed the dizzy and bought a z6 dizzy and the check engine light was on but it had been on since I got it. But when I drove it this time the rpms would not let me go past 4k . On my way back home the car died and did not turn back on. Idk what could be wrong with it . Any ideas?
Drove it home. 2 hours later died on the freeway and didn't wanna turn on.
The guy had done obd2 to obd1 wiring for the motor ?
I changed the dizzy and bought a z6 dizzy and the check engine light was on but it had been on since I got it. But when I drove it this time the rpms would not let me go past 4k . On my way back home the car died and did not turn back on. Idk what could be wrong with it . Any ideas?
#5
Honda-Tech Member
Thread Starter
Re: Help: D16y8 in del sol
I got the Intake temp Sensor #10 as well as #19 witch is a/t luck up silanoid ? I wired up the temp sponsor and it went away then came back up . How do I fix #19?
#7
Honda-Tech Member
Thread Starter
Re: Help: del sol/D16y8 swap - won't rev past 4k rpm after replacing distributor
Yea I was trying a different ecu but now the car doesn't even turn on . There is a lot of wires that are cut under the dash and there is a replay they wired to the fuel pump and i wired it to power and the fuel pump primed but wouldn't turn on -_-
Thread
Thread Starter
Forum
Replies
Last Post
tuvtec
Honda Civic / Del Sol (1992 - 2000)
5
08-30-2014 10:24 PM
Noodle$
Honda Civic / Del Sol (1992 - 2000)
7
04-19-2011 10:17 AM