Found the problem! D16y7 bottom end rattle
#1
Found the problem! D16y7 bottom end rattle
So I had a post about something ticking and rattling in my bottom end I got a new oil pan gasket and started to remove everything to get at it, I pulled off the inspection plate and a bolt fell into my hand... After some research I see that it's a pressure plate bolt. Is there anyway I can get at it without removing the transmission ? Maybe thru the top where the starter meets the flywheel? Any help is appreciated as this is my first honda
#3
Honda-Tech Member
Re: Found the problem! D16y7 bottom end rattle
If it's a pressure plate bolt you have bigger problems. Like how it got through the end of the block there is no opening between trans and engine . Does it have a 12 point 10mm head on the bolt ?
#5
Re: Found the problem! D16y7 bottom end rattle
^thanks lol I know it's not a flywheel bolt it's too small as yes it's a 12 point head on it, I've heard you can see them with the starter off, I just wondering if I can replace this bolt atleast somewhat properly without dropping the trans, I plan on putting loctite unlike the last person, even if I just use a wrench it's better then it not being there at all right?
#6
Honda-Tech Member
Re: Found the problem! D16y7 bottom end rattle
Sorry I must have been sleeping still I thought it said he pulled oil pan and found bolt behind inspection plate make way more sense
Thread
Thread Starter
Forum
Replies
Last Post
FermiumHalo
Honda Civic / Del Sol (1992 - 2000)
5
09-12-2005 06:00 AM