Dom93

i decided not to go with skunk2 camshafts! i was wanting to know which stage brian crower camshafts i should get for my set up! here is my buiild
ls/vtec:
b18a1 bottom and b16a head

valvetrain: brian crower dual valve springs and steel retainers, blox flat face high compression valves!

bottom end: p30 pistons, stock sleeve and stock bore (11.7:1 compression), stock crank, stock mains and bearings..

miscellaneous: skunk2 intake mani., skunk2 fuel rail, short ram intake, high flow exhaust (full exhaust)..

thank you!

hannslebo

Stage 2

Seems like stage 3 would be overkill for this setup.

Dom93

exactly what i thought to! i just wanted some opinions first! stage three is for like highly build engines, stage two is for like moderate.. i will go with stage two most likely! thank!!!

98civdx

I was thinking the same, but with that compression he may be ok with the stage 3's.

I would PM a mod and ask to have this thread moved to the allmotor forum, or post a new one in there and keep this one.

Dom93

good idea! thanks

kyden

if i remember correctly, there are v2v issues with the stage 3.

Dom93

i emailed BC and they said stage 2 would be best for my setup and compression...