99 Civic Driver's side knuckle/hum assembly...
#1
Honda-Tech Member
Thread Starter
99 Civic Driver's side knuckle/hum assembly...
I think I already know that answer to this question but, will a '97 EX manual transmission knuckle/hub assembly work on a '99?
Also, will I need an alignment after changing the whole knuckle/hub assembly out if I don't mess with the toe adjustment rod?
I need a new wheel bearing and lower ball joint on mine and I found a whole new knuckle/hub assembly with a good wheel bearing and lower ball joint for $65 and would like to scoop it up...
Also, will I need an alignment after changing the whole knuckle/hub assembly out if I don't mess with the toe adjustment rod?
I need a new wheel bearing and lower ball joint on mine and I found a whole new knuckle/hub assembly with a good wheel bearing and lower ball joint for $65 and would like to scoop it up...
#2
Honda-Tech Member
Thread Starter
Re: 99 Civic Driver's side knuckle/hum assembly...
Also, the car that the knuckle/hub assembly is coming from is non-ABS and had 95k on it. My car is non-ABS as well...
#5
Honda-Tech Member
Thread Starter
Re: 99 Civic Driver's side knuckle/hum assembly...
I figured as much, that's why I went ahead and bought it before you replied...let this thread die!
Thread
Thread Starter
Forum
Replies
Last Post
Jacob Weiser
Honda Civic / Del Sol (1992 - 2000)
7
11-24-2012 10:29 AM