vacuum/boost signal 08 si
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: Western, KY, USA
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
vacuum/boost signal 08 si
I've done quite of bit of turbo work, but this is my first rodeo with an 8th gen. What does everyone do for feed line for the boost/vacuum gauge and bov signal? I've read on full races site about splicing into the brake booster line with a check valve, but there has to be a better option.
#2
Re: vacuum/boost signal 08 si
I've done quite of bit of turbo work, but this is my first rodeo with an 8th gen. What does everyone do for feed line for the boost/vacuum gauge and bov signal? I've read on full races site about splicing into the brake booster line with a check valve, but there has to be a better option.
i just taped a fitting underneath the intake manifold for mine.
#3
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: Western, KY, USA
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
Re: vacuum/boost signal 08 si
I've been searching and searching and coming up with very little solid information. Why is there so little on this? Anyon e have pics of how they did theirs? Or useful links?
Thread
Thread Starter
Forum
Replies
Last Post
South Bay Surfer
Forced Induction
2
07-05-2008 06:34 PM