SRT-4 intercooler in a civic???
#3
Join Date: Mar 2007
Location: North Lake, WI, United States
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Re: SRT-4 intercooler in a civic??? (mormonboy)
going to need a lot of fab.... but should fit... a stock srt4 intercooler isnt that thick... but is tall.... (If I were you, i would remove my front bumper support... and angle the intercooler..... it will fit better that way)
#5
Honda-Tech Member
Join Date: Mar 2007
Location: Somewhere in, UT, USA
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
Re: SRT-4 intercooler in a civic??? (ek9=])
I have an aftermarket one from my buddies srt 4 for my Ej8. To make it fit, I had to remove the support and notch the radiator support to run the charge pipes because the inlets are on the backside of the end tanks. Didnt really take long to do. No pics though
BTW... You will need to move the radiator 2 or 3 inches towards the driver side in order for the charge pipe to clear the radiator.
BTW... You will need to move the radiator 2 or 3 inches towards the driver side in order for the charge pipe to clear the radiator.
Thread
Thread Starter
Forum
Replies
Last Post
purplecivicturbo
Welding / Fabrication
17
11-19-2007 06:59 AM
08, 1996, civic, ebay, honda, install, installation, intercooler, intercooller, move, radiator, srt, srt4, support, turbo