♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
Honda-Tech Member
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
^ nice
Osvaldo Orozco: i have no idea. bought from a friend. there's several companies out there that has catches like that. moroso b&r etc.
bks84 i stripped one of my red/blue so i had to use a black one.
fitseries3 which one did you run? the plastic one is pretty small compared to the aluminum one. all in fab has fat *** cores, i dont see why something so smaller in width would require that much cutting..
i did use an ebay half core to make a custom one. though i didnt finish it, you get the idea of a cheap custom fab rad. bought some aluminum from home depot and did some new ends.
(this might make it to worse fab thread lmao)
Osvaldo Orozco: i have no idea. bought from a friend. there's several companies out there that has catches like that. moroso b&r etc.
bks84 i stripped one of my red/blue so i had to use a black one.
fitseries3 which one did you run? the plastic one is pretty small compared to the aluminum one. all in fab has fat *** cores, i dont see why something so smaller in width would require that much cutting..
i did use an ebay half core to make a custom one. though i didnt finish it, you get the idea of a cheap custom fab rad. bought some aluminum from home depot and did some new ends.
(this might make it to worse fab thread lmao)
Honda-Tech Member
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
Made this for a customer
Eg milspec harness
Detatchable hondata cpr
Denso injectors
8 injector ready
Ngk wide band o2
Raychem DR25
Eg milspec harness
Detatchable hondata cpr
Denso injectors
8 injector ready
Ngk wide band o2
Raychem DR25
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
wont fit in EG, youd have to cut the hood latch and half the radiator support out and cut the middle of the bumper out as well. even if you do all that, the inlet and outlet for the hoses would rub on the inside of the passenger frame rail and make it a pain in the *** to install the hoses.
i guess there are 2 options for EG's, custom fab a radiator, or buy the all in fab one for $400+shipping.
im a fan of doing everything myself and figuring out what parts to use/fabing things up etc. EVERY car i own i have built myself, by myself and the ONLY other person to even touch my cars is my tuner. i dont allow ANYONE other than my tuner EVER drive my cars either. i know i sound insane but thats just how i am.
i guess there are 2 options for EG's, custom fab a radiator, or buy the all in fab one for $400+shipping.
im a fan of doing everything myself and figuring out what parts to use/fabing things up etc. EVERY car i own i have built myself, by myself and the ONLY other person to even touch my cars is my tuner. i dont allow ANYONE other than my tuner EVER drive my cars either. i know i sound insane but thats just how i am.
This is on a del sol. I just had to take out the center support bar and trim the passenger side a bit for that nipple. I also cut two holes into the top of the bottom support for the legs of the radiator.
Honda-Tech Member
iTrader: (1)
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
Great install. Get some Al sheet and fill in those gaps around the sides and you should get some really good cooling out of that setup.
Ditto
iTrader: (1)
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
http://www.hondaautomotiveparts.com/...HEATER+CONTROL
Would item #15 be the AC switch block off plate? Just looking for that small piece that covers the AC button.
Thanks!
Would item #15 be the AC switch block off plate? Just looking for that small piece that covers the AC button.
Thanks!
Steve at Heart
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
Roti- #15 does say air conditioner switch lid. So looks good to me. Have you thought about hitting up a junkyard?
Honda-Tech Member
iTrader: (1)
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
I'm not sure how it is in Atlanta, but you won't really find non-ac cars here in Florida. All the dealers here installed it in every single one before they ever hit the lot.
Last edited by spAdam; 01-14-2014 at 08:58 AM.
Ditto
iTrader: (1)
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
Yeah, I am pretty confident it is the correct item, just thought I'd double check.
Yeah, I don't know that I would find too many here without AC.
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
Little more work done to my tuck, currently stripping and redoing. Going slow but it's going.
Fabbed a bracket for my catch can and mounted it under the dash, ran a plastic fitting out of the breather holes, into hoses that go through to the firewall and the filters attatch to them. It came out ok, it's kinda a mock up, need a few more things. Hoping it works out well for me.
Fabbed a bracket for my catch can and mounted it under the dash, ran a plastic fitting out of the breather holes, into hoses that go through to the firewall and the filters attatch to them. It came out ok, it's kinda a mock up, need a few more things. Hoping it works out well for me.
Honda-Tech Member
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
^ Now that's something you don't see every day!
Let us know if you figure out how to get in there and replace it. I seem to remember I got the piece but couldn't figure out how to replace the A/C button with it. Could have also been a case of laziness
http://www.hondaautomotiveparts.com/...HEATER+CONTROL
Would item #15 be the AC switch block off plate? Just looking for that small piece that covers the AC button.
Thanks!
Would item #15 be the AC switch block off plate? Just looking for that small piece that covers the AC button.
Thanks!
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
Honda-Tech Member
Join Date: Jun 2005
Location: NOR CAL
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
its nice to be different but I think the catch can is better off in that location where you have the filter at. Catch cans are a nice piece of fabrication and should be shown off.
Honda-Tech Member
Join Date: Jan 2008
Location: California, MA
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
here is my setup about 80% done. ray chem Quick disconnect harness done by Cj's.. any constructive criticisim appreciated! still have to put in my new coilover setup and get all my Mugen license plate bolts to use in the bay.
Honda-Tech Member
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
Obd2b ek harness with obd1 ecu conversion, raychem dr25, milspec wire and amphenol quick disconnect
B*a*n*n*e*d
iTrader: (15)