crank pully notches
#2
Honda-Tech Member
Join Date: Sep 2009
Location: Tecumseh Oklahoma
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
Re: crank pully notches
you use the single notch to set the mechanical timing. and the 3 notches are for the light gun when you set your ignition timing.
and while i had my head off i was watching the pistons to visually see when piston #1 was top dead enter. so i was going to eyeball the piston to see if the marks wher off a little, and once i eyeballed that piston to the most center point as i could
i looked at the mark on the cover and it was dead center in the mark so............
the timing marks DONT lie.
and while i had my head off i was watching the pistons to visually see when piston #1 was top dead enter. so i was going to eyeball the piston to see if the marks wher off a little, and once i eyeballed that piston to the most center point as i could
i looked at the mark on the cover and it was dead center in the mark so............
the timing marks DONT lie.
#3
Honda-Tech Member
Thread
Thread Starter
Forum
Replies
Last Post
jonnybebad
Honda Civic / Del Sol (1992 - 2000)
2
02-20-2005 08:34 AM