F22A4 Turbo Build (for anyone who cares lol)
#153
Honda-Tech Member
Join Date: Jul 2007
Location: Indianapolis
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Re: F22A4 Turbo Build (for anyone who cares lol)
What is your power band like with this engine/trans combo? You must be hitting 5th in the 1/4 mile with the h23 trans right?
#154
Re: F22A4 Turbo Build (for anyone who cares lol)
Basically, the 13" wheel requires Integra Brake disc and caliper, and you have to redrill the Prelude hub for 4x100 and install new studs. Can't remember if it need the caliper mounting bracket as well, but I would assume it does. Many guys in Colorado have done it, and I know Roger did it, although he may have had a different approach. Much cheaper than the custom front suspension and brakes the Oaks boys did for their car.
#155
Re: F22A4 Turbo Build (for anyone who cares lol)
#156
Re: F22A4 Turbo Build (for anyone who cares lol)
#157
Honda-Tech Member
Thread Starter
Join Date: Nov 2005
Location: Mitchells, Va, United States
Posts: 572
Likes: 0
Received 3 Likes
on
3 Posts
Re: F22A4 Turbo Build (for anyone who cares lol)
just about, and I'm just about shifting to 4th in the 1/8th. I'm still only revving to around 8400, which i can probably stretch out a bit, But i need a final drive pretty bad,
#158
Honda-Tech Member
Thread Starter
Join Date: Nov 2005
Location: Mitchells, Va, United States
Posts: 572
Likes: 0
Received 3 Likes
on
3 Posts
Re: F22A4 Turbo Build (for anyone who cares lol)
Don't know how I missed this way back then!
Basically, the 13" wheel requires Integra Brake disc and caliper, and you have to redrill the Prelude hub for 4x100 and install new studs. Can't remember if it need the caliper mounting bracket as well, but I would assume it does. Many guys in Colorado have done it, and I know Roger did it, although he may have had a different approach. Much cheaper than the custom front suspension and brakes the Oaks boys did for their car.
Basically, the 13" wheel requires Integra Brake disc and caliper, and you have to redrill the Prelude hub for 4x100 and install new studs. Can't remember if it need the caliper mounting bracket as well, but I would assume it does. Many guys in Colorado have done it, and I know Roger did it, although he may have had a different approach. Much cheaper than the custom front suspension and brakes the Oaks boys did for their car.
Damn, that seems like a lot of work lol I think i'll just stick to 15's for now. As far as my times are going traction isn't much of a problem for me. Though the car is on like 15 year old suspension it seems to be working so I'm not messing with it til I need to.
#159
Honda-Tech Member
Thread Starter
Join Date: Nov 2005
Location: Mitchells, Va, United States
Posts: 572
Likes: 0
Received 3 Likes
on
3 Posts
Re: F22A4 Turbo Build (for anyone who cares lol)
hopefully I can keep up with this thread again. I've had the car out a handful of times since the 12.2 that's still my best pass in the 1/4. I've way upped my 1/8th times but i can't think of them off the top of my head but the car should be deep into the 11's when i get back to a 1/4 mile track, hoping to make some changes over this winter and get her back out full time next year. I will say though the f22 stock block is no joke. I've beat this car for the last 3 years and shes still holding up strong. I did just have my first child recently lol so i think racing for me this year is postponed....maybe. lol But wanted to say hey to everyone and give people a quick update.
Thread
Thread Starter
Forum
Replies
Last Post
96gsrhatch8230
Honda Civic / Del Sol (1992 - 2000)
4
03-12-2007 07:16 PM
aleks77
Forced Induction
4
11-13-2006 12:35 AM