Pwnmeister

iTrader: (1)

Hello, the lock/unlocking function was working perfectly fine ever since I bought the car (that's like half a year ago) until today. I can lock and unlock from the inside of my car using the lock/unlock switch but once I put the key in ignition even if it's not in the (II) on position, the car won't lock anymore if I hit the switch. I don't hear any clicking sound neither. The unlocking part works no matter what so the only issue is the locking part.
As for my alarm: this is the alarm that I have. It's a Honda factory one. Here's an example pic except I don't have the trunk button.
http://img62.exs.cx/img62/7/s2000Key.jpg

So the unlock button on the alarm remote works but locking won't work.
When I hit unlock on my alarm remote, the doors unlock and lights flash, etc. But no response when I hit the lock button on the alarm remote.

Can anyone help?

Bad_dude

Will it lock if the key is not in the ignition cylinder? It could be a feature to prevent you from locking the keys inside. Maybe part of the alarm programming which wire to the key sense.

Pwnmeister

iTrader: (1)

Yes the doors will lock if I hit the lock/unlock switch on my door panel when the key is NOT in the ignition.

Pwnmeister

iTrader: (1)

Sorry everyone. I just realized my passenger door wasn't fully closed when I walked around my car.
Thanks anyways

Bad_dude

It's cool, it happens. But wouldn't your dash show the door is open?