Skunk2 Pro Series Stage 1 vs Stock h22a cams
#1
Skunk2 Pro Series Stage 1 vs Stock h22a cams
I was told that I should be changing my cams and that with the Skunk2 Stage 1 pro series cams I will be blowing the intake charge out the exhaust valves. Here's my set up on a t3/to4e 60-1 turbo...any advice on what cams I should be using. I'm aiming for 400whp.
HEAD
-1993 JDM H22a DOHC VTEC
-skunk2 pro series stage 1 cams
-skunk2 pro series cam gears
-skunk2 pro series valves
-skunk2 pro series titanium retainers
-skunk2 pro series valve springs
-skunk2 pro series intake manifold
-skunk2 pro series 68mm throttle body
-brand new jdm distributor
-custom painted valve cover w/ cut outs for cam gears
-3 angle valve job
-Cometic head gasket
-ARP main studs
-hondata intake manifold gasket
BLOCK
-jdm h22a block
-Mahle Gold Series 10:1 Compression/Stock Bore
-Eagle Forged H-Beam Rods
-ACL Main Bearings
-ACL Rod Bearings
-ARP Rod Bolts
-Balanced and Micro Polished Crank
-Kaizen Speed Balance Shaft Eliminator Kit
-New OEM Water Pump
-New OEM Timing Belt
-H23 Manual Tensioner Conversion
-ARP Head Studs
-Moroso Oil Pan
-Moroso Oil Pick-Up
mozzandherb is online now Report Post Edit/Delete Message Reply With Quote Multi-Quote This Message Quick reply to this message
HEAD
-1993 JDM H22a DOHC VTEC
-skunk2 pro series stage 1 cams
-skunk2 pro series cam gears
-skunk2 pro series valves
-skunk2 pro series titanium retainers
-skunk2 pro series valve springs
-skunk2 pro series intake manifold
-skunk2 pro series 68mm throttle body
-brand new jdm distributor
-custom painted valve cover w/ cut outs for cam gears
-3 angle valve job
-Cometic head gasket
-ARP main studs
-hondata intake manifold gasket
BLOCK
-jdm h22a block
-Mahle Gold Series 10:1 Compression/Stock Bore
-Eagle Forged H-Beam Rods
-ACL Main Bearings
-ACL Rod Bearings
-ARP Rod Bolts
-Balanced and Micro Polished Crank
-Kaizen Speed Balance Shaft Eliminator Kit
-New OEM Water Pump
-New OEM Timing Belt
-H23 Manual Tensioner Conversion
-ARP Head Studs
-Moroso Oil Pan
-Moroso Oil Pick-Up
mozzandherb is online now Report Post Edit/Delete Message Reply With Quote Multi-Quote This Message Quick reply to this message
#6
Re: Skunk2 Pro Series Stage 1 vs Stock h22a cams
Why spend the big money on cams? ive made (and so have tons of other people) over 600whp on stock cams... your not going to gain much at that power level... why not save the 500 bucks and just turn the boost up a few PSI?
My head was COMPLETLY stock, only revving to 8k RPM on 29psi with a 35R to make the numbers in my sig.... that was on pump gas and meth, ditch the ARP main studs as well unless the main line has been check out already with them in...
My head was COMPLETLY stock, only revving to 8k RPM on 29psi with a 35R to make the numbers in my sig.... that was on pump gas and meth, ditch the ARP main studs as well unless the main line has been check out already with them in...
Trending Topics
#8
Honda-Tech Member
Re: Skunk2 Pro Series Stage 1 vs Stock h22a cams
For only 400whp... stock cams will work just fine. We've tuned tons of H's on stock cams making much more then 400whp. Invest that money into a properly designed turbo manifold as the log styles will cause exhaust reversion on the H's.
#9
Re: Skunk2 Pro Series Stage 1 vs Stock h22a cams
I have a custom tubular manifold. The problem is these cams came with the motor that I bought, so for now I am keeping them in there because the car is getting tuned this week, my only concern was if the cams were going to be a real problem
#10
Honda-Tech Member
Re: Skunk2 Pro Series Stage 1 vs Stock h22a cams
if you think about it, does it really make sense what you are asking? Why would SKUNK2 spend a ton of money on R&D to make cams that are so big that the over lap like that? Sounds like some one with a V8 is trying to talk about something they know nothing about. SKUNK2 makes bigger cams then that. You should be fine, and if you have ANY doughts, call or email SKUNK2 they have been great about answering questions i have had in the past.
#11
Re: Skunk2 Pro Series Stage 1 vs Stock h22a cams
if you think about it, does it really make sense what you are asking? Why would SKUNK2 spend a ton of money on R&D to make cams that are so big that the over lap like that? Sounds like some one with a V8 is trying to talk about something they know nothing about. SKUNK2 makes bigger cams then that. You should be fine, and if you have ANY doughts, call or email SKUNK2 they have been great about answering questions i have had in the past.
#12
Honda-Tech Member
Re: Skunk2 Pro Series Stage 1 vs Stock h22a cams
With the pro1's on turbo a very good flowing turbo manifold will be needed a log/restrictive turbo manifold will cause issues with such a cam.
Thread
Thread Starter
Forum
Replies
Last Post
Peckrwood
All Motor / Naturally Aspirated
1
09-10-2012 09:29 AM
civic b16b
Honda Civic / Del Sol (1992 - 2000)
2
03-20-2007 10:56 PM