Gauges recommened for Nitrous usage
#1
Junior Member
Thread Starter
Join Date: Feb 2002
Location: Slowlane
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
Gauges recommened for Nitrous usage
I am looking for the most needed gauges for a nitrous setup (with the execption of the nitrous gauge).
I have a wet kit. I have the norm.. I/H/E, fuel rail(aem), fpr(aem), and fuel gauge.
The motor is a sohc, D16. I will be soon swap in a DOHC.
From doing some searching on the site here, the 3 gauges for a all motor are:
oil press, oil temp, and water press,
I have space for 5 gauges, (2) in dash bezel, and (3) on the pillar.
I was looking at a greddy a/f, egt, water temp, oil press, oil temp.
Another question has anyone be able to dremel a autometer (triple) 2-1/16 pod to fit a 60mm gauge?
Reason I ask cause I would like to install the greddy a/f (only comes in 60mm) and egt (60mm) in the pillar pod and put a 52mm gauge in the last opening.
And then put (2) 52mm in the bezel.
What 5 gauges would be best suited for what I have mentioned?
thx
Eric
I have a wet kit. I have the norm.. I/H/E, fuel rail(aem), fpr(aem), and fuel gauge.
The motor is a sohc, D16. I will be soon swap in a DOHC.
From doing some searching on the site here, the 3 gauges for a all motor are:
oil press, oil temp, and water press,
I have space for 5 gauges, (2) in dash bezel, and (3) on the pillar.
I was looking at a greddy a/f, egt, water temp, oil press, oil temp.
Another question has anyone be able to dremel a autometer (triple) 2-1/16 pod to fit a 60mm gauge?
Reason I ask cause I would like to install the greddy a/f (only comes in 60mm) and egt (60mm) in the pillar pod and put a 52mm gauge in the last opening.
And then put (2) 52mm in the bezel.
What 5 gauges would be best suited for what I have mentioned?
thx
Eric
#2
Honda-Tech Member
Join Date: Jan 2002
Location: IL, USA
Posts: 1,723
Likes: 0
Received 0 Likes
on
0 Posts
Re: Gauges recommened for Nitrous usage (Midwestrider)
2 i can recomend are A/F ratio(you already have), and a fuel pressure.
I would say a nitrous pressure gauge but you already know that
I would say a nitrous pressure gauge but you already know that
#3
Junior Member
Thread Starter
Join Date: Feb 2002
Location: Slowlane
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
Re: Gauges recommened for Nitrous usage (Midwestrider)
Anyone else?
I have searched here in the FI section but most ppl are running turbo's, anyone else with nitrous care to share some input?
I have searched here in the FI section but most ppl are running turbo's, anyone else with nitrous care to share some input?
Thread
Thread Starter
Forum
Replies
Last Post
RCautoworks
Honda CRX / EF Civic (1988 - 1991)
30
05-09-2003 06:42 PM
Midwestrider
Acura Integra Type-R
12
02-11-2002 03:40 PM