Project 500whp h23
#52
Honda-Tech Member
Join Date: Feb 2006
Location: Florida
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
god that **** is scary, i rode in a 560whp eg coupe (h22, yes i know you are proud of your h23, but its the same series of engine) anyways it was my tuners car and we were spinning his tires at 90mph it looked litterally like my life was in fast forward lol.
#53
Honda-Tech Member
Re: (big-cat)
Here's some shots of the custom IC piping kit that we put together for Jimmy. Let us know how it turns out Jimmy... you should definetely make 500whp. We have a customers 4th gen here that we are looking at making close to 600whp with. H23's get very little respect, lol.
#59
Thread Starter
Join Date: Oct 2006
Location: tunkhannock, pa, 18657
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Re: Project 500whp h23 (boostedgsr1234)
hey guys I haven't touched the car since june. I have been extremely busy between working and keeping my grades up in college. I will let you guys know when it is finished.
#61
B*a*n*n*e*d
Join Date: Jul 2006
Location: DFW, TX, U.S.A
Posts: 1,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: Project 500whp h23 (gogunkergorilla)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gogunkergorilla »</TD></TR><TR><TD CLASS="quote">c'mon you can do both don't be a slave to the books</TD></TR></TABLE>
eff school! car comes first hahaha j/k man yeah finish school make big buck$$$ then u can really go all out
eff school! car comes first hahaha j/k man yeah finish school make big buck$$$ then u can really go all out
#62
Re: Project 500whp h23
are you running the AEM ems? If so, i can send you my calibration files... I have a built F22 which is damn near the same motor...except i'm 85.5mm bore. The F22a and H23 use the same 95mm crankshaft... I have a 15psi cal and a 20psi cal... This was for a 60-1 turbo and 850cc injectors, so it would only be a minor change for your 1000... Let me know if you want them... good luck...
#65
Thread Starter
Join Date: Oct 2006
Location: tunkhannock, pa, 18657
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Re: (sihseries)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sihseries »</TD></TR><TR><TD CLASS="quote">how much did you spend on the all the parts</TD></TR></TABLE>
way too much. over 10k.
way too much. over 10k.
#66
Junior Member
Join Date: Dec 2006
Location: handing you your ass
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
Re: (jwyndsdime)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jwyndsdime »</TD></TR><TR><TD CLASS="quote">
way too much. over 10k.</TD></TR></TABLE>
lemme guess...college loan refunds????
way too much. over 10k.</TD></TR></TABLE>
lemme guess...college loan refunds????
#67
Thread Starter
Join Date: Oct 2006
Location: tunkhannock, pa, 18657
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Re: (gogunkergorilla)
the car is up and running
I currently have it tuned for 10psi due to the stock MAP. I am going to put the new 3 bar in tonight and tune it for 25psi. I will keep you guys posted.
I currently have it tuned for 10psi due to the stock MAP. I am going to put the new 3 bar in tonight and tune it for 25psi. I will keep you guys posted.
Thread
Thread Starter
Forum
Replies
Last Post
wip_customs
For Sale
10
05-23-2009 08:53 AM