problem after nitrous install (VCN-2000)
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Chucktown, SC
Posts: 5,737
Likes: 0
Received 0 Likes
on
0 Posts
problem after nitrous install (VCN-2000)
My friend Chad up at RandD had the kit on his car for a couple of days and it would throw a TPS code when it was spraying. He took it off cause he got pissed off at it. So I installed it in my car today. Went out to test it out and again with the tps code. It displays TPS ERROR on the display and I get a CEL 7 and the engine jerks kinda bad when the cel comes on. Anyone know what the problem could be? Thanks for the help.
Oh yeah. The kit is the Venom VCN-2000
Oh yeah. The kit is the Venom VCN-2000
#2
Join Date: Jan 2004
Location: Occupation is not liberation.
Posts: 551
Likes: 0
Received 0 Likes
on
0 Posts
Re: problem after nitrous install (EF9_SiR)
Could the "brain box" be ******* w/ the voltage input to the TPS?? I dunno. I just started my nitrous install today(finish tomorrow...too damn cold once the sun goes down). When you figure it out let us know.
Also...maybe get a multi-meter and read out the wire from the brain box to the TPS(after de-arming ) and see if it is putting out more voltage then it should @ WOT...SHould be putting out 12V right?
Also...maybe get a multi-meter and read out the wire from the brain box to the TPS(after de-arming ) and see if it is putting out more voltage then it should @ WOT...SHould be putting out 12V right?
#4
Honda-Tech Member
Join Date: Oct 2003
Location: Roanoke A.K.A. Redneckville,VA
Posts: 4,012
Likes: 0
Received 1 Like
on
1 Post
Re: problem after nitrous install (EF9_SiR)
i would double check your TPS and make sure it is adjusted correctly.should be .5v at closed throttle and increse to about 4.5v at WOT.
if that isn't it,i'd say the only other option is a problem with the nitrous brain box.
chris
if that isn't it,i'd say the only other option is a problem with the nitrous brain box.
chris
#5
Honda-Tech Member
Join Date: May 2004
Location: apple valley, ca., united states
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Re: problem after nitrous install (VCN-2000)
Does any have the VCN 2000 software for sale? Venom is out of buisness and I've been trying to locate the software and haven't had any luck. Your blessing would be greatly appreciated with some cash.
Thread
Thread Starter
Forum
Replies
Last Post
Dancing is Forbidden
Forced Induction
14
01-11-2004 02:47 PM