Need a tad bit of help H-T...
#1
Need a tad bit of help H-T...
About to finish my setup, but have a quick question about the oil line running from the oil pan to the turbo. My boy says that since the block is aluminum, which are all d16y8 OEM blocks aluminum? It would be hard to weld, and something about how if you drill the hole, the oil pan could crack since it's aluminum, my question is how would I set this oil line up exactly? Thanks for the suggestions...
#4
Re: (st9vex)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by st9vex »</TD></TR><TR><TD CLASS="quote">Also want to throw another question out there, is there a place that sells oil pans for my y8 that our pre-drilled and ready to go for turbo...?</TD></TR></TABLE>
Moroso makes pans for the d16 that are already pre tapped for an oil return line and oil temp.
Moroso makes pans for the d16 that are already pre tapped for an oil return line and oil temp.
#7
Man U FTW
contact the user "Stealthmode62" and tell him about your issue
http://www.stealthmodeperformance.com
http://www.stealthmodeperformance.com
Thread
Thread Starter
Forum
Replies
Last Post
h23vtec_dc2
Honda Civic / Del Sol (1992 - 2000)
24
05-07-2014 08:19 AM