Need help! 250hp on 16 psi?
#26
Honda-Tech Member
Thread Starter
Join Date: Dec 2008
Location: Lakeland,Florida
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help! 250hp on 16 psi?
It sounds fine but it lags like a sob...No boost in first takes till high in second to get full boost with me wot shifting..I forgot about this issue.. I was launching at 7 grand on the antilag at the track and it would fall on its face every time..Was pissing me off pretty bad...Here I'll load a video of me running it and you can see what I mean.
Here you go..its hard to hear but you can see it fall on its face and it did this about 12 times no matter if I added air no burnout whatever..2.7 60ft
http://www.youtube.com/watch?v=oF3O1Rmw86I
Here you go..its hard to hear but you can see it fall on its face and it did this about 12 times no matter if I added air no burnout whatever..2.7 60ft
http://www.youtube.com/watch?v=oF3O1Rmw86I
#27
Honda-Tech Member
Join Date: Oct 2008
Location: Denham Springs, LA, USA
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help! 250hp on 16 psi?
Where did you get a 2.25" dp? I've never seen that before lol! I've made 400whp at 17psi with a 2.5" dp on a much larger turbo, so idk if that's the problem. I had a problem similar to this before and my headgasket was blown. I know you said the comp #s are good but you might wanna double check it. Hook up an air line to the comp gauge line and see if you can hear air leaking between cylinders.
Thread
Thread Starter
Forum
Replies
Last Post