My 400HP goal "Need Help"
01-03-2009, 08:25 AM
#26
Honda-Tech Member
Join Date: Nov 2004
Location: 40.201N, 77.189W, PA
Posts: 4,738
Likes: 0
Received 7 Likes
on
4 Posts
Re: My 400HP goal "Need Help"
LOL. I was expecting to open this thread and see a D-series build. :D
Dude, don't worry about cams right off the bat. Honda heads and cams are just fine. Unless you absolutely want cams in there, the biggest thing you want to have is forged pistons and rods. Not sure how strong stock B20 sleeves are, but resleeving may be necessary as well unless you step down to a B18 bottom end.
Dude, don't worry about cams right off the bat. Honda heads and cams are just fine. Unless you absolutely want cams in there, the biggest thing you want to have is forged pistons and rods. Not sure how strong stock B20 sleeves are, but resleeving may be necessary as well unless you step down to a B18 bottom end.
01-03-2009, 08:45 PM
#27
Honda-Tech Member
Thread Starter
Join Date: Aug 2007
Location: Langhorne, pa, United States
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: My 400HP goal "Need Help"
Sorry bout that what I should have asked was ..... Can I use my stock map and position sensors on a 70mm throttle body that im about to get ??? I can right ???
I already have my Pistons, Rods, Type R cams, Ported B16 head(no Internals yet), Type R LSD trans, Crower Cam Gears, B20 Block(currently looking for a company to sleeve my block for a good price ANYONE no a place???)
LOL. I was expecting to open this thread and see a D-series build. :D
Dude, don't worry about cams right off the bat. Honda heads and cams are just fine. Unless you absolutely want cams in there, the biggest thing you want to have is forged pistons and rods. Not sure how strong stock B20 sleeves are, but resleeving may be necessary as well unless you step down to a B18 bottom end.
Dude, don't worry about cams right off the bat. Honda heads and cams are just fine. Unless you absolutely want cams in there, the biggest thing you want to have is forged pistons and rods. Not sure how strong stock B20 sleeves are, but resleeving may be necessary as well unless you step down to a B18 bottom end.
01-04-2009, 08:31 AM
#30
Honda-Tech Member
Join Date: Jun 2005
Location: AZ, USA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Re: My 400HP goal "Need Help"
Depends on how much you want to spend. I'm in MI, and I'm sending my block to CA. I had been checking around here on the East coast since I've been back, and the prices are ridiculous. I've got a B18B, its getting 84mm Darton sleeves, bore/hone matched for arias pistons, step-decked, I'm using my extra GSR girdle with main caps, and it'll be line honed. That is costing me about $1300 not including shipping. East coast prices were way higher, and that didn't include everything I stated. Golden Eagle sleeves for $800, but that just includes sleeving. If you want the shop or talk to the big man PM me.
01-05-2009, 05:17 PM
#31
Honda-Tech Member
Thread Starter
Join Date: Aug 2007
Location: Langhorne, pa, United States
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: My 400HP goal "Need Help"
Depends on how much you want to spend. I'm in MI, and I'm sending my block to CA. I had been checking around here on the East coast since I've been back, and the prices are ridiculous. I've got a B18B, its getting 84mm Darton sleeves, bore/hone matched for arias pistons, step-decked, I'm using my extra GSR girdle with main caps, and it'll be line honed. That is costing me about $1300 not including shipping. East coast prices were way higher, and that didn't include everything I stated. Golden Eagle sleeves for $800, but that just includes sleeving. If you want the shop or talk to the big man PM me.
Does anyone no if I can use my stock eg throttle body sensors on a new 70mm throttle body im about to get?? I think I can but someone told me that I cant
Thread
Thread Starter
Forum
Replies
Last Post
b20eg9daddy
Honda Civic / Del Sol (1992 - 2000)
1
11-09-2008 01:29 PM
