LS VTEC Boost build
#1
Honda-Tech Member
Thread Starter
LS VTEC Boost build
Hi guys, I building a lsv setup,
B16 head
ITR cams
ITR intake an trottle body
LS block
LS pistons and rods
Arp rod bolts
B20 crank
I'm running a Switzer turbo
Cal I run 15psi safely on this setup?
B16 head
ITR cams
ITR intake an trottle body
LS block
LS pistons and rods
Arp rod bolts
B20 crank
I'm running a Switzer turbo
Cal I run 15psi safely on this setup?
#3
I never narc'd on nobody!
iTrader: (1)
Re: LS VTEC Boost build
You mean a Schwitzer turbo? Which one? There are more than a few of them.
Actually, don't answer that. Just go read the FAQ sticky. We can lead you to water every time you have a question, or we can just teach you were to find it for yourself.
Actually, don't answer that. Just go read the FAQ sticky. We can lead you to water every time you have a question, or we can just teach you were to find it for yourself.
#5
Man U FTW
Re: LS VTEC Boost build
Boost pressure is irrelevant. Set your goals in terms of horsepower, not PSI
The only time PSI matters is when choosing a MAP sensor - Do you have an upgraded MAP?
The only time PSI matters is when choosing a MAP sensor - Do you have an upgraded MAP?
#6
Honda-Tech Member
Thread Starter
#7
Man U FTW
Re: LS VTEC Boost build
Then you're good to go. Have a power goal in mind and let your tuner decide when its time to shut it down.
If we knew a little more about the turbo you're using, we could give you a better idea. There are many turbos with the Schwitzer name on it - the one that comes to mind for me is the S256. If this is what you're running, it wont take 15psi to make 320whp....more like 8psi. Again, this is purely speculation...
If we knew a little more about the turbo you're using, we could give you a better idea. There are many turbos with the Schwitzer name on it - the one that comes to mind for me is the S256. If this is what you're running, it wont take 15psi to make 320whp....more like 8psi. Again, this is purely speculation...
Trending Topics
#8
Honda-Tech Member
Thread Starter
Re: LS VTEC Boost build
Then you're good to go. Have a power goal in mind and let your tuner decide when its time to shut it down.
If we knew a little more about the turbo you're using, we could give you a better idea. There are many turbos with the Schwitzer name on it - the one that comes to mind for me is the S256. If this is what you're running, it wont take 15psi to make 320whp....more like 8psi. Again, this is purely speculation...
If we knew a little more about the turbo you're using, we could give you a better idea. There are many turbos with the Schwitzer name on it - the one that comes to mind for me is the S256. If this is what you're running, it wont take 15psi to make 320whp....more like 8psi. Again, this is purely speculation...
Thread
Thread Starter
Forum
Replies
Last Post
Acura_I-RS
Forced Induction
8
07-15-2005 01:24 PM