pelacuas

I have a d15b vtec engine and I want to turbo it. I plan to run 5lbs of boost do I need to replace any parts or can I just install it like that?

jyacoba2009

you got a turbo kit? bigger injectors? chipped ecu? tune?

eg6stroker

just get some arp head bolts and some injectors and tune it

LutherX

you should be fine with everything stock. get a chipped p28 and tune it. the tune is key.

joe111599

Nah just slap the turbo on it and run 30 pounds. Stock injectors and everything. Everyones doing it.

pelacuas

I have chipped p28ecu would it be good to get bigger injectors? For5lbs of boost? Or can I run stock?- thanks

jfoster

iTrader: (1)

You're going to have to use the search feature to educate yourself. This stuff has been covered 1000 times.

Here is over 500pgs of Dseries set ups -> https://honda-tech.com/forums/showth...t=single+slams

Schister66

Do yourself a favour and read through the FAQ at the top of the page. It will answer a lot of the starter questions you have. If you have unanswered questions after doing your homework, then ask and we will be glad to push you in the right direction.

One piece of info to start you on your way: Dont set goals in terms of PSI as its an arbitrary measure...instead, set a power goal. Power creation can vary widely at X psi from one turbo to the next...or even one setup to the next (using the same turbo). If you search what boost actually is, you'll begin to understand why this is the way it is...

pelacuas

Do these things really work for increase in hpnthe electric one kinda makes a little sense to me


http://item.mobileweb.ebay.com/viewi...id=27884699177


http://item.mobileweb.ebay.com/viewi...id=85635622292

jfoster

iTrader: (1)

No, that ***** a joke. I hope you noticed the thread I linked to and took note that no one was running that junk. There is also a FAQ section at the top of the forum that you should read.

javie3

just change injectors

turbociv910

ebay= good **** !!

pelacuas

ok so i already did some research and know what i need like turbo manifold piping intercooler etc... only thing im stuck on is that with more air you obviosly need more fuel but im not sure how to get it? will bigger injectors work? how can i do it?

jfoster

iTrader: (1)

You'll need a higher flow fuel pump, like a walbro 255 intank, larger injectors such as 450cc DSM injectors, tuning software such as crome/uberdata/neptune/uberdata/etc, a wide band 02, and the knowledge of how to tune with the tuning software (either learned or purchased from a pro tuner).

Have you read the Single Slams thread at all? Like I said there's over 500pgs of set ups and most included this info. For example:

pelacuas

I've read the single slams thread I just wasn't sure how to exactly increase the fuel intake _ thanks