cc-fab manifolds?
04-14-2007, 02:49 AM
#51
Junior Member
Join Date: Apr 2004
Location: Connecticut
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Semtec)
Semtec...
wow you just went all out to make him look as bad as possible. you obviosly hate this kid more then anything. exspecially when you have to make new names and take a good few hours out of your time to write that post, and spend money on a manifold just to bash on it (when you could have welded one yourself)
basicly your just a looser
and deserve the same fate as the kid who welded the manifold.
get a life man, seriously.
wow you just went all out to make him look as bad as possible. you obviosly hate this kid more then anything. exspecially when you have to make new names and take a good few hours out of your time to write that post, and spend money on a manifold just to bash on it (when you could have welded one yourself)
basicly your just a looser
and deserve the same fate as the kid who welded the manifold.
get a life man, seriously.
04-14-2007, 06:45 AM
#52
Honda-Tech Member
Re: (SinisterCRX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SinisterCRX »</TD></TR><TR><TD CLASS="quote">
Well, that's your problem. You need to go back to the future to get your manifold!
</TD></TR></TABLE>
lol, yeah, fixed that. It was ordered on 12/22/06.
Well, that's your problem. You need to go back to the future to get your manifold!
</TD></TR></TABLE>
lol, yeah, fixed that. It was ordered on 12/22/06.
04-14-2007, 12:32 PM
#53
* B A N N E D *
Join Date: Apr 2007
Location: SoCal, CA
Posts: 848
Likes: 0
Received 0 Likes
on
0 Posts
Re: (crx2fast)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crx2fast »</TD></TR><TR><TD CLASS="quote">Semtec...
wow you just went all out to make him look as bad as possible. you obviosly hate this kid more then anything. exspecially when you have to make new names and take a good few hours out of your time to write that post, and spend money on a manifold just to bash on it (when you could have welded one yourself)
basicly your just a looser
and deserve the same fate as the kid who welded the manifold.
get a life man, seriously.</TD></TR></TABLE>
You know, every time there is someone who defends CC-fab, they are ALWAYS located in CT...
wow you just went all out to make him look as bad as possible. you obviosly hate this kid more then anything. exspecially when you have to make new names and take a good few hours out of your time to write that post, and spend money on a manifold just to bash on it (when you could have welded one yourself)
basicly your just a looser
and deserve the same fate as the kid who welded the manifold.
get a life man, seriously.</TD></TR></TABLE>
You know, every time there is someone who defends CC-fab, they are ALWAYS located in CT...
04-14-2007, 12:33 PM
#54
Man U FTW
Re: (Semtec)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Semtec »</TD></TR><TR><TD CLASS="quote">
You know, every time there is someone who defends CC-fab, they are ALWAYS located in CT...</TD></TR></TABLE>
I'll vouch for Josh and Corey because they've always been good to me...i haven't ever gotten screwed over or had ANYTHING negative w/ them....
check the location...
You know, every time there is someone who defends CC-fab, they are ALWAYS located in CT...</TD></TR></TABLE>
I'll vouch for Josh and Corey because they've always been good to me...i haven't ever gotten screwed over or had ANYTHING negative w/ them....
check the location...
04-14-2007, 09:33 PM
#57
Re: (DaZman69)
well i should chime in since people are throwing my name around and pretending they know my business.
I DO NOT work with josh anymore, contrary to popular belief. believe what you want.
Greg, i apologize for not getting back to you with that other manifold but i just didnt have time to build such a custom manifold at the time. i probably should have just told you that, but you need to make it clear that you DID NOT pay for anything you didnt get. you requested a manifold but it was never paid for.
JD, ill buy you all the black boss porter beer you want as soon as you come up here and tune my car.
I DO NOT work with josh anymore, contrary to popular belief. believe what you want.
Greg, i apologize for not getting back to you with that other manifold but i just didnt have time to build such a custom manifold at the time. i probably should have just told you that, but you need to make it clear that you DID NOT pay for anything you didnt get. you requested a manifold but it was never paid for.
JD, ill buy you all the black boss porter beer you want as soon as you come up here and tune my car.
04-15-2007, 06:31 AM
#58
Honda-Tech Member
Re: (CoreyR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CoreyR »</TD></TR><TR><TD CLASS="quote">
Greg, i apologize for not getting back to you with that other manifold but i just didnt have time to build such a custom manifold at the time. i probably should have just told you that, but you need to make it clear that you DID NOT pay for anything you didnt get. you requested a manifold but it was never paid for.
</TD></TR></TABLE>It's cool, not as big of a deal as it could have been (just haa a customer ridin' my *** for what seems like forever now because all I lack to build his car is the manidfold)
All you really had to do was let me know. I didn't say I paid for it, I would like to make it clear that I pay for all my manifolds promptly on delivery as we agreed. If you would have just told me that you just didn't have time, then it would have really not been an issue at all, instead I had to assume you just weren't going to make it for whatever reason and find another source which really put me behind because I waited around quite a while expecting it to show up.
Long story short, all you had to do was inform me. If I would have known, then there would have been no issue at all (other than the cracked manifold now). This is only the 2nd time I've heard from you since I placed the order.
What about the crack in the ramhorn I have now?
Greg, i apologize for not getting back to you with that other manifold but i just didnt have time to build such a custom manifold at the time. i probably should have just told you that, but you need to make it clear that you DID NOT pay for anything you didnt get. you requested a manifold but it was never paid for.
</TD></TR></TABLE>It's cool, not as big of a deal as it could have been (just haa a customer ridin' my *** for what seems like forever now because all I lack to build his car is the manidfold)
All you really had to do was let me know. I didn't say I paid for it, I would like to make it clear that I pay for all my manifolds promptly on delivery as we agreed. If you would have just told me that you just didn't have time, then it would have really not been an issue at all, instead I had to assume you just weren't going to make it for whatever reason and find another source which really put me behind because I waited around quite a while expecting it to show up.
Long story short, all you had to do was inform me. If I would have known, then there would have been no issue at all (other than the cracked manifold now). This is only the 2nd time I've heard from you since I placed the order.
What about the crack in the ramhorn I have now?
04-15-2007, 07:52 AM
#59
Honda-Tech Member
Join Date: Aug 2002
Location: ashEVILle, NC, USSR
Posts: 4,417
Likes: 0
Received 0 Likes
on
0 Posts
Re: (CoreyR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CoreyR »</TD></TR><TR><TD CLASS="quote">
JD, ill buy you all the black boss porter beer you want as soon as you come up here and tune my car. </TD></TR></TABLE>
I'll let you know when my next appearance in the NE will be, sir.
JD, ill buy you all the black boss porter beer you want as soon as you come up here and tune my car.
</TD></TR></TABLE>I'll let you know when my next appearance in the NE will be, sir.
04-15-2007, 07:57 AM
#60
Re: (Joseph Davis)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Joseph Davis »</TD></TR><TR><TD CLASS="quote">
I'll let you know when my next appearance in the NE will be, sir. </TD></TR></TABLE>
well hurry it up
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Autoworks »</TD></TR><TR><TD CLASS="quote">It's cool, not as big of a deal as it could have been (just haa a customer ridin' my *** for what seems like forever now because all I lack to build his car is the manidfold)
All you really had to do was let me know. I didn't say I paid for it, I would like to make it clear that I pay for all my manifolds promptly on delivery as we agreed. If you would have just told me that you just didn't have time, then it would have really not been an issue at all, instead I had to assume you just weren't going to make it for whatever reason and find another source which really put me behind because I waited around quite a while expecting it to show up.
Long story short, all you had to do was inform me. If I would have known, then there would have been no issue at all (other than the cracked manifold now). This is only the 2nd time I've heard from you since I placed the order.
What about the crack in the ramhorn I have now?
</TD></TR></TABLE>
greg give me a call.
I'll let you know when my next appearance in the NE will be, sir.
</TD></TR></TABLE>well hurry it up
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Autoworks »</TD></TR><TR><TD CLASS="quote">It's cool, not as big of a deal as it could have been (just haa a customer ridin' my *** for what seems like forever now because all I lack to build his car is the manidfold)
All you really had to do was let me know. I didn't say I paid for it, I would like to make it clear that I pay for all my manifolds promptly on delivery as we agreed. If you would have just told me that you just didn't have time, then it would have really not been an issue at all, instead I had to assume you just weren't going to make it for whatever reason and find another source which really put me behind because I waited around quite a while expecting it to show up.
Long story short, all you had to do was inform me. If I would have known, then there would have been no issue at all (other than the cracked manifold now). This is only the 2nd time I've heard from you since I placed the order.
What about the crack in the ramhorn I have now?
</TD></TR></TABLE>
greg give me a call.
04-15-2007, 10:20 AM
#61
Honda-Tech Member
Re: (CoreyR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CoreyR »</TD></TR><TR><TD CLASS="quote">well i should chime in since people are throwing my name around and pretending they know my business.
I DO NOT work with josh anymore, contrary to popular belief. believe what you want.
</TD></TR></TABLE>
Great move man. I'm sure I don't know the whole story, but I know for sure Josh was simply the kind of person you would never want to go into business with. I wish the best of luck to ya.
I DO NOT work with josh anymore, contrary to popular belief. believe what you want.
</TD></TR></TABLE>
Great move man. I'm sure I don't know the whole story, but I know for sure Josh was simply the kind of person you would never want to go into business with. I wish the best of luck to ya.
04-15-2007, 03:50 PM
#63
Join Date: Jul 2004
Location: Farmington, MN, USA
Posts: 4,144
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Boostwerks.com)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostwerks.com »</TD></TR><TR><TD CLASS="quote"> I know for sure Josh was simply the kind of person you would never want to go into business with. </TD></TR></TABLE>
Hmm, I think someone else said that before.
Hmm, I think someone else said that before.
04-15-2007, 04:16 PM
#64
Junior Member
Join Date: Sep 2004
Location: South Carolina
Posts: 632
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Semtec)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Semtec »</TD></TR><TR><TD CLASS="quote">
You know, every time there is someone who defends CC-fab, they are ALWAYS located in CT...</TD></TR></TABLE>
you're right, i don't live in south carolina or anything
You know, every time there is someone who defends CC-fab, they are ALWAYS located in CT...</TD></TR></TABLE>
you're right, i don't live in south carolina or anything
05-14-2007, 06:21 AM
#65
Honda-Tech Member
Re: (CoreyR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CoreyR »</TD></TR><TR><TD CLASS="quote">
greg give me a call.</TD></TR></TABLE>
Bringing this back...called you this morning. I got back in town last night and had a message saying that cracked manifold went from bad to worse.
greg give me a call.</TD></TR></TABLE>
Bringing this back...called you this morning. I got back in town last night and had a message saying that cracked manifold went from bad to worse.
05-14-2007, 01:10 PM
#67
Honda-Tech Member
Join Date: Mar 2004
Location: 860, ct, usa
Posts: 1,534
Likes: 0
Received 0 Likes
on
0 Posts
Re: (93CX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93CX »</TD></TR><TR><TD CLASS="quote">CCFAB continues to suck even to this day.. unbelievable.</TD></TR></TABLE>
explain, who is cc-fab again?
explain, who is cc-fab again?
05-31-2007, 05:25 PM
#69
Honda-Tech Member
Join Date: Jul 2001
Location: Northeast, USA
Posts: 6,030
Likes: 0
Received 0 Likes
on
0 Posts
Re: (xenocron)
I'm Josh. Give me all of your money, and maybe I'll send you a POS manifold that is misaligned and will break... maybe I'll send you nothing.
Thread
Thread Starter
Forum
Replies
Last Post
acurar0ss
Classifieds: Forced Induction
15
10-04-2006 07:12 PM
NosajCivic
Forced Induction
12
12-21-2002 09:40 AM
