My new build!!! Fully built LS/Vtec in the works.
#1
Junior Member
Thread Starter
Join Date: Nov 2004
Location: Twin Falls Udahoe
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
My new build!!! Fully built LS/Vtec in the works.
WellI finnaly started on my build. After a tragic meeting with a trampoline I am on crutches for a while so decided to rip the the very tired b16 turbo out and redo the build.
Here is what I am starting with.
84mm benson sleeved b18a
Je 9:1 pistons
Pauter rods
PnP b16a head
skunk 2 valvetrain (springs retainers valves)
Edelbrock victor X manifold
skunk 2 70mm TB
880cc injectors
moroso oil pan
GSR cams
Presicion SC63 turbo
Tial 38mm wastegate
ANd a few other little things I am still in the process of gathering all the parts mainly gaskets but after all that is done it should be going together. I am shotting for a completion time of mid June. Hopfully going to hit the 550whp area. I will be putting up pics as soon as I can get them.
Here is what I am starting with.
84mm benson sleeved b18a
Je 9:1 pistons
Pauter rods
PnP b16a head
skunk 2 valvetrain (springs retainers valves)
Edelbrock victor X manifold
skunk 2 70mm TB
880cc injectors
moroso oil pan
GSR cams
Presicion SC63 turbo
Tial 38mm wastegate
ANd a few other little things I am still in the process of gathering all the parts mainly gaskets but after all that is done it should be going together. I am shotting for a completion time of mid June. Hopfully going to hit the 550whp area. I will be putting up pics as soon as I can get them.
#3
HT White Ops
iTrader: (4)
Join Date: Oct 2005
Location: Ova Thur, United States
Posts: 6,116
Likes: 0
Received 0 Likes
on
0 Posts
Re: My new build!!! Fully built LS/Vtec in the works. (homicydalboy)
sweet! I couldn't help but to laugh when I read your tragic mishap. Several scenarious ran through my head as to what could have possibly happened.
#4
Junior Member
Thread Starter
Join Date: Nov 2004
Location: Twin Falls Udahoe
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
Re: My new build!!! Fully built LS/Vtec in the works. (SD_Lurker)
Lets just say a lot of 151 and a trampoline equal 5months on crutches. Broke my leg stage 3 ankle sprain and tore all the ligaments in the ankle and foot. So now I have screws in there but I get them out next month so I am busting *** trying to get this all put together. i am off to honda right now in fact.
#5
Junior Member
Thread Starter
Join Date: Nov 2004
Location: Twin Falls Udahoe
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
Re: My new build!!! Fully built LS/Vtec in the works. (homicydalboy)
well just getting the block put together. it sure is looking good with the oil pan and stuff on it now. Just got my mugen thremostat and fan switch in. Along with my hondata gasket greddy catch can action racing clutch golden eagle LS/vtec kit. I just got off the phone with my machenest and he said that my flywheel shoud be done with the head on saturday!! So I am ordering my valvetrain tomorrow!!!
On a bad note. somebody decided they wanted my b16 lsd tranny more than I did and came and took it off my hands along with some other random parts and tools.
So now I get to rock the open diff LS tranny. Ohh not dealing with my motor my harness,jdm gauge cluster NRG quick release momo comp sterring wheel front and rear lip rear disck brake conversion with rotora rotors buddy club grounding kit all came in. Yeaaaa!!! Stay posted for pics cause I am ghetto and use a disposable then go to wally world and put them on a disc to upload them.
On a bad note. somebody decided they wanted my b16 lsd tranny more than I did and came and took it off my hands along with some other random parts and tools.
So now I get to rock the open diff LS tranny. Ohh not dealing with my motor my harness,jdm gauge cluster NRG quick release momo comp sterring wheel front and rear lip rear disck brake conversion with rotora rotors buddy club grounding kit all came in. Yeaaaa!!! Stay posted for pics cause I am ghetto and use a disposable then go to wally world and put them on a disc to upload them.
Thread
Thread Starter
Forum
Replies
Last Post
:Josh:
Classifieds: Forced Induction
13
10-06-2012 01:37 AM
slick1851
Mid-West (Sales)
5
05-29-2010 10:48 AM