Keo00civic

iTrader: (1)

What's up guys? Have a quick question for the Borg Warner guys. I picked up a s366 and the guy told me that the oil feed was a 1/2 npt . The smallest I could find was that 1/2 npt that gets reduced to a 6an on the other side. Now I know 6an is way to large. Biggest I would feed is 4an. Oil drain looks like your normal 10an. Any sugguestions ?? Thanks

WolfInSheepsClothing

iTrader: (1)

You need a 1/4 to -3 (or 4, depending on what you'd prefer to run). I'm using a 1/4 to -3 adapter on my s366.

Keo00civic

iTrader: (1)

1/4 npt screws in?? Ok I'll try that and see if it works.

TurboIntegra

Use a -3 line. On my buddies Supra we had a -4 line and it would cause the turbo to smoke. We switched to a -3 line and if went away. I believe he called Borg Warner and they recommended a -3.

b20ricepower

I run a -4 line to mine. No smoke yet. Its a great turbo

Keo00civic

iTrader: (1)

thanks for all the replies. i never seen anyone using a 3an to feed. but ill see whats good when that time comes.

Keo00civic

iTrader: (1)

how much power did you make with it?

b20ricepower

Idk yet. Enough. Lets put it that way lol. Too much for the street if I crank up the boost.