ACL race or duraglide bearings
#26
Honda-Tech Member
iTrader: (4)
Join Date: Apr 2005
Location: South, Texas
Posts: 12,903
Likes: 0
Received 0 Likes
on
0 Posts
Re: ACL race or duraglide bearings
yeah .0035 is good but .0040 is quite a bit of ptw for a daily driver and just not nessesary.
Running .0030 currently on my setup but im also runnign srp pistons that have high silicon content and dont have the expansion rate that the cp's and other low silicon content pistons have. Granted there not as strong of a piston but they will still handle plenty of abuse and power
Running .0030 currently on my setup but im also runnign srp pistons that have high silicon content and dont have the expansion rate that the cp's and other low silicon content pistons have. Granted there not as strong of a piston but they will still handle plenty of abuse and power
#27
Honda-Tech Member
Re: ACL race or duraglide bearings
yeah .0035 is good but .0040 is quite a bit of ptw for a daily driver and just not necessary.
Running .0030 currently on my setup but I'm also running srp pistons that have high silicon content and dont have the expansion rate that the cp's and other low silicon content pistons have. Granted there not as strong of a piston but they will still handle plenty of abuse and power
Running .0030 currently on my setup but I'm also running srp pistons that have high silicon content and dont have the expansion rate that the cp's and other low silicon content pistons have. Granted there not as strong of a piston but they will still handle plenty of abuse and power
I was just referring to my setup, but all are different. Best to research your piston and make a good decision that suits ur uses and material the best.
#29
Honda-Tech Member
iTrader: (1)
Join Date: Jul 2004
Location: Federick, MD, usa
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
Re: ACL race or duraglide bearings
If you get the standard size Acl's can you just pop them in Plastigage and go? And if they are a bit to tight or loose how do you adjust?
#30
Re: ACL race or duraglide bearings
So whats the problem?, are they tight or loose and is it con rod or main bearings?.
#31
Honda-Tech Member
iTrader: (1)
Join Date: Jul 2004
Location: Federick, MD, usa
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
Re: ACL race or duraglide bearings
Yes, if you got good parts that are within spec.. The second part is a long explanation, best too figure out if there is a problem then post it. A lot of circumstances could make bearings too tight or loose, and there is many ways too correct it. Are you talking about Con rod or main bearings?, each one would involve a different procedure.
So whats the problem?, are they tight or loose and is it con rod or main bearings?.
So whats the problem?, are they tight or loose and is it con rod or main bearings?.
#32
Honda-Tech Member
Join Date: Feb 2006
Location: East Bay, CA, USA
Posts: 1,524
Likes: 0
Received 0 Likes
on
0 Posts
Re: ACL race or duraglide bearings
Only once have I had ACLs be a little too tight for my liking and just went with oem. Other than that, I have no issues at all. Just plastigage 3 times if you have too!
Thread
Thread Starter
Forum
Replies
Last Post