0.48 or 0.63 a/r housing for b18b
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2000
Location: Vancouver, BC
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
0.48 or 0.63 a/r housing for b18b
Does anyone have experience with either spec? Is the 0.63 gonna spool much later and is the 0.48 that limiting on higher boost if I only want to run abou 6-8 psi? TIA
#3
Re: 0.48 or 0.63 a/r housing for b18b (Pat)
if you only want to run 6-8psi, get the .48. thats plenty big to make that boost... and will give less lag than the .63.... although, if you ever want to run more boost down the line- you really should get the 63.
perhaps a compromise, and get a .57 trim
perhaps a compromise, and get a .57 trim
#5
Re: 0.48 or 0.63 a/r housing for b18b (01geeser)
if you are only looking to run 6-10 lbs of boost, you'll be happy with the boost response of the .48
and when your looking to run more boost, you can always just buy the .63 a/r turbine housing for only $159
just my 2cents..
and when your looking to run more boost, you can always just buy the .63 a/r turbine housing for only $159
just my 2cents..
#6
Re: 0.48 or 0.63 a/r housing for b18b (CHEAPTURBOdotCOM)
Isen't it true though that the top end will suffer a bit no matter the boost level with a smaller turbing housing like that?
Trending Topics
#8
Junior Member
Join Date: Aug 2002
Location: Fairfax, VA, USA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Re: 0.48 or 0.63 a/r housing for b18b (Pat)
I run a .63 turbine on my B18B at 9psi and have full boost at 3700 in 1st gear. It is less in other gears because of the load on the engine. Full boost at 3000 in 4th gear.
- Chris
#10
Re: 0.48 or 0.63 a/r housing for b18b (redline201)
if you are only looking to run 6-10 lbs of boost, you'll be happy with the boost response of the .48
and when your looking to run more boost, you can always just buy the .63 a/r turbine housing for only $159
just my 2cents..
and when your looking to run more boost, you can always just buy the .63 a/r turbine housing for only $159
just my 2cents..
#11
Honda-Tech Member
Thread Starter
Join Date: Feb 2000
Location: Vancouver, BC
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
Re: 0.48 or 0.63 a/r housing for b18b (juicy.koreans.suck)
sweet! back from the dead. I did end up going with the .48 since I didn't plan to boost higher than 8 psi for the moment
Thread
Thread Starter
Forum
Replies
Last Post