My first basempa h22
#1
My first basempa h22
hey all i just got crome and was trying to retune and adjust wat i could out of the stock h22 basemap a little tweeks in low/high cams etcetc
the setup includes
jdm h22 blacktop(10.6.1CR)
manual m2a4 trany
0.20head shave(assuming the car should be around 10.8.1 or so)
4-2-1 header 2.5inch piping and exhaust
msd ignition with blaster
removed the IABS
a very mildy mild headport and polish
the guy from whome i got the car(allmost fogot,its a ED3 sedan) had this setup with an auto p13-j50 ecu(no vtec whatsover too many cells)
i got rid of all the wiring issue+i bought a p08 ecu ill be chipping it soon
the setup includes
jdm h22 blacktop(10.6.1CR)
manual m2a4 trany
0.20head shave(assuming the car should be around 10.8.1 or so)
4-2-1 header 2.5inch piping and exhaust
msd ignition with blaster
removed the IABS
a very mildy mild headport and polish
the guy from whome i got the car(allmost fogot,its a ED3 sedan) had this setup with an auto p13-j50 ecu(no vtec whatsover too many cells)
i got rid of all the wiring issue+i bought a p08 ecu ill be chipping it soon
Thread
Thread Starter
Forum
Replies
Last Post
JDMRice
All Motor / Naturally Aspirated
3
07-14-2006 12:08 PM
length
Hybrid / Engine Swaps
14
03-18-2003 07:44 AM