May FS Thread
#1
Moderator
Thread Starter
May FS Thread
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
#2
Honda-Tech Titanium Member
iTrader: (3)
Re: May FS Thread
For sale is my M&W pro 10 ignition and a Crane ps92 performance coil and harness. I bought this off a member on here and never got around to using it as I've changed plans for my build (which you can probably tell by the amount of items I have for sale). Mods I will make on big list with everything I have listed instead of multiple threads. Price is $500+shipping and paypal fees. Please text me 613-299-4081 or Pm me. Thanks. I also apologize, apparently I thought we were on a leap year and didn't realize we were in March already.
#4
Honda-Tech Member
Join Date: Mar 2007
Location: NY
Posts: 1,332
Likes: 0
Received 0 Likes
on
0 Posts
Selling a mint gunmetal k20/k24 valve cover
Also selling a 04 type s bare trans casing
I'm located in Long Island NY and can be reached at 516 342 0318
Mint gunmetal k20/k24 valve cover
Hit me up 516 342 0318
Also selling a 04 type s bare trans casing
I'm located in Long Island NY and can be reached at 516 342 0318
Mint gunmetal k20/k24 valve cover
Hit me up 516 342 0318
Last edited by crazes; 05-06-2015 at 07:51 AM. Reason: Only one post allowed
#6
Honda-Tech Member
Re: May FS Thread
For Sale:
GRP Aluminum rods for GSR. .866 wrist pin and 3\8 arp2000 bolts used 1 season(about 30 passes) new these are $750 asking $350 or bo.
2- Tial MVR 44mm wastegates. $300 or BO EACH. or $575 for the pair.
Email- Juice2435@aol.com
GRP Aluminum rods for GSR. .866 wrist pin and 3\8 arp2000 bolts used 1 season(about 30 passes) new these are $750 asking $350 or bo.
2- Tial MVR 44mm wastegates. $300 or BO EACH. or $575 for the pair.
Email- Juice2435@aol.com
Trending Topics
#8
Re: May FS Thread
M&W Pro 10 and Crane Fireball coil. Pulled from car years ago after putting a hole in the block and it's just been sitting around since. $500 shipped anywhere. Email in pic is best.
#9
Re: May FS Thread
*Please Read Whole ADD*
1) I will not part out any of the packages do not PM me asking to sell you 1 rim/tire. If they are posted together in a package with a total price they will NOT be separated.
2) The prices are firm if you do not like them please do not PM me, if you offer less then my asking price I will not respond.
I have bought and sold lots on here so buy with confidence. I can provide numerous vouches if you require. All prices are shipped and in US dollars you must pay paypal or send as a gift. I am located in Canada but do not let this stop you from buying. Do not bother lowballing me I will completely ignore them. If you don't like the prices feel free to buy elsewhere.
Text or pm 306 551 5139
- New only mounted ALL In Fab Front mount Dual Back door 3" Vibrant flange (12"x3"x24" 700hp rated) with 3" piping(polished but due to poor packaging when shipped to me it has scratches on the piping. If powder coated it would look mint.) Comes with 4 Vibrant clamps and 3 rings, Tial silver BOV, All in fab tucked radiator and tubular Support - $1550 shipped or just the front mount and piping $1000 shipped
- Quaife QDF1U B series LSD, Brand new in Box(Box got a little messed up during shipping but taped it back together - $750 shipped
- Skunk 2 B series ULTRA 5.5l, 90mm TB opening New only mounted - $750 shipped
- K-tuned 90mm TB New only mounted - $360 shipped
- Skunk2 black B series Fuel Rail new only mounted - $100 shipped
- BNIB Turbo smart 50mm BOV with flange. Blue in color - $200 shipped
- BNIB Weldon FPR A2040-281-a-15 - $200 shipped
- BNIB BWR b series 5th gear Cuff - $150 shipped
-DSS 2.9 Kswap axles into EG Rated at 500hp 32mm axles (used but not hard) - $400 shipped
- Hybrid Racing RBC Adapter plate for Throttle Body BNIB Stock bore - $50 shipped
- BNIB K-tuned no cut shift box for z3 - $325 shipped
- BNIB Hybrid racing performance z3 shift cables - $275 shipped
- BNIB z3 Hybrid racing clutch line - $50 shipped
- Eg With B series front mount 900hp Garrett Core 3" in and out with 3" aluminum piping (dent on the outlet flange of front mount from shipping and piping) - $400 shipped
1
2
3
4
5
6
7
9
1) I will not part out any of the packages do not PM me asking to sell you 1 rim/tire. If they are posted together in a package with a total price they will NOT be separated.
2) The prices are firm if you do not like them please do not PM me, if you offer less then my asking price I will not respond.
I have bought and sold lots on here so buy with confidence. I can provide numerous vouches if you require. All prices are shipped and in US dollars you must pay paypal or send as a gift. I am located in Canada but do not let this stop you from buying. Do not bother lowballing me I will completely ignore them. If you don't like the prices feel free to buy elsewhere.
Text or pm 306 551 5139
- New only mounted ALL In Fab Front mount Dual Back door 3" Vibrant flange (12"x3"x24" 700hp rated) with 3" piping(polished but due to poor packaging when shipped to me it has scratches on the piping. If powder coated it would look mint.) Comes with 4 Vibrant clamps and 3 rings, Tial silver BOV, All in fab tucked radiator and tubular Support - $1550 shipped or just the front mount and piping $1000 shipped
- Quaife QDF1U B series LSD, Brand new in Box(Box got a little messed up during shipping but taped it back together - $750 shipped
- Skunk 2 B series ULTRA 5.5l, 90mm TB opening New only mounted - $750 shipped
- K-tuned 90mm TB New only mounted - $360 shipped
- Skunk2 black B series Fuel Rail new only mounted - $100 shipped
- BNIB Turbo smart 50mm BOV with flange. Blue in color - $200 shipped
- BNIB Weldon FPR A2040-281-a-15 - $200 shipped
- BNIB BWR b series 5th gear Cuff - $150 shipped
-DSS 2.9 Kswap axles into EG Rated at 500hp 32mm axles (used but not hard) - $400 shipped
- Hybrid Racing RBC Adapter plate for Throttle Body BNIB Stock bore - $50 shipped
- BNIB K-tuned no cut shift box for z3 - $325 shipped
- BNIB Hybrid racing performance z3 shift cables - $275 shipped
- BNIB z3 Hybrid racing clutch line - $50 shipped
- Eg With B series front mount 900hp Garrett Core 3" in and out with 3" aluminum piping (dent on the outlet flange of front mount from shipping and piping) - $400 shipped
1
2
3
4
5
6
7
9
#10
Honda-Tech Member
Join Date: Nov 2007
Location: sOcaL
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Re: May FS Thread
Hot Rod Car For Sale: 1993 Honda Civic Coupe. Asking $20K obo. No trades but I will part out if needed. All prices are with obo. Thanks
RS Machine Sleeved GSR, Arias Pistons, Carrillo Rods, RS Machine Cylinder Head W/Supertech Valve Train, Skunk2 Pro1 Cams, ARP Head Studs. $4000
Synchrotech Built Dog Box W/Liberty Gears & Billet Bell Housing. $5000
Tilton Twin Disc Carbon Carbon Clutch, Tilton Hydro Throw Out Bearing, Tilton Clutch Master. $3500
Weldon 2345-A Fuel Pump & Regulator (Forgot Which Model). $1200
Bullseye Turbo S475 $1000
Custom Turbo Manifold T4, Dual Waste Gates (Tial). $2000
15x8 Weld Import Magnum W/Bead Locks, 15x3.5 Weld Magnum Gold Spindle Mount Wheels, M&H Tires. $2000
Nuformz Rear Axle W/Strange Spindle Mount Strut. $3000
Water To Air IC Kit. $400
Hondata S300 V2. $500
Hondata CPR. $250
Much more to list. Just ask what's available. Thanks
RS Machine Sleeved GSR, Arias Pistons, Carrillo Rods, RS Machine Cylinder Head W/Supertech Valve Train, Skunk2 Pro1 Cams, ARP Head Studs. $4000
Synchrotech Built Dog Box W/Liberty Gears & Billet Bell Housing. $5000
Tilton Twin Disc Carbon Carbon Clutch, Tilton Hydro Throw Out Bearing, Tilton Clutch Master. $3500
Weldon 2345-A Fuel Pump & Regulator (Forgot Which Model). $1200
Bullseye Turbo S475 $1000
Custom Turbo Manifold T4, Dual Waste Gates (Tial). $2000
15x8 Weld Import Magnum W/Bead Locks, 15x3.5 Weld Magnum Gold Spindle Mount Wheels, M&H Tires. $2000
Nuformz Rear Axle W/Strange Spindle Mount Strut. $3000
Water To Air IC Kit. $400
Hondata S300 V2. $500
Hondata CPR. $250
Much more to list. Just ask what's available. Thanks
#11
Honda-Tech Member
iTrader: (3)
Join Date: Feb 2004
Location: Phoenix, AZ
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Re: May FS Thread
Hello from Arizona, Have a few parts for sale.
JE 81.5mm 11.5:1 pistons, with wrist pins and locks. NO RINGS. great cond. $250.00
Set of M&H slicks 23x8x13 5 passes on these. New cond. $350.00
Set of Bogart drag wheels 13x8. great cond. RARE $350.00 ***SOLD***
Buyers pay shipping. I have paypal.
Feel free to text or pm if you have questions.
602-575-1416 Thanks
JE 81.5mm 11.5:1 pistons, with wrist pins and locks. NO RINGS. great cond. $250.00
Set of M&H slicks 23x8x13 5 passes on these. New cond. $350.00
Set of Bogart drag wheels 13x8. great cond. RARE $350.00 ***SOLD***
Buyers pay shipping. I have paypal.
Feel free to text or pm if you have questions.
602-575-1416 Thanks
Last edited by XRacerX; 05-31-2015 at 06:08 PM.
#12
Honda-Tech Member
Join Date: Jan 2009
Location: Miami
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
Re: May FS Thread
H2B ALL MOTOR PARTOUT
ASP Header - 1250 shipped
B16 tranny w Mfactory clutch LSD & Synchrotech 3/4 hub and synchros - 1000 + shipping (LSD alone cost 850, Got receipt and warranty Card as well)
Tilton Twin Disc w/ New Discs - 850 shipped
Vtec Solenoid (2) - 40 shipped each
Alternator - 70 Shipped
B series Starter - 60 shipped
Valve Cover Cut Cam Gears - 60 shipped
B series T bracket - 50 Shipped
B series Shift Linkage - 70 + Shipping
ASP Header - 1250 shipped
B16 tranny w Mfactory clutch LSD & Synchrotech 3/4 hub and synchros - 1000 + shipping (LSD alone cost 850, Got receipt and warranty Card as well)
Tilton Twin Disc w/ New Discs - 850 shipped
Vtec Solenoid (2) - 40 shipped each
Alternator - 70 Shipped
B series Starter - 60 shipped
Valve Cover Cut Cam Gears - 60 shipped
B series T bracket - 50 Shipped
B series Shift Linkage - 70 + Shipping
Last edited by zuptidi; 05-30-2015 at 05:15 PM.
#13
Honda-Tech Member
Re: May FS Thread
-----TESTING WATERS-----
I'm in no real rush to sell the car kinda up in the air if I want to or not. But if the right buyer comes along an gives me my asking price then its theres and I'd also like the car to go to a good home.
Asking $27k Firm
(Witch I believe is reasonable considering what it cost to build a car like this)
Car is located in Reno,NV
Contact # (775) 527-9523
Car:
1992 Honda Civic
10 point molly cage
Deist window net
Stroud parachute
2 Kirky seats w/seat covers
Gforce belts
Cnc staging brake
FabC drag wing
Source Racing 3 piece front
Cf hood
Arev Motorsports dress up engine bay kit
Engine:
Golden Eagle sleeved & O-ringed K20a2 block
86mm Custom Arias Pistons w/upgraded wrist pins
Manley Turbo tuff rods
ACL Race bearings
Stock port K20a2 head, Ferrea Comp Plus valves
Prayoonto racing Stg 2 all motor cams, Supertech valvetrain*
Golden Eagle IM, SpeedFactory Thermal IM gasket
70mm Shunk2 TB
ATI race damper
Drivetrain/Chassis:
Gforce Dog Box w/Mfactory lsd
Dynamic Performance Scattershield
Dss 5.9 axles
Ktuned Traction Bar
Solid lower bushings up front
Mfactory lower ball joints
Competition Clutch Twin Disc
Hasport Racing solid billet mounts
Ktuned Billet shifter box w/welded shifter
Ktuned 5th gear lockout
Ktuned race cables
Blox drag coilovers
Belak Industries 13x9 single beadlock OG series front and 15x4 OG series rears
M&H 24.5 / 9.5 / 13
M&H 26 / 4.5 / 15
Also comes with black rota gt3's with brand new M&H G60's
Turbo setup:
Precision Turbo Billet PT6766 open .96a/r T4 journal bearing
SpeedFactory Sidewinder*
Single Tial 60mm WG, Tial Q BOV
Treadstone 1000hp intercooler
Push to lock fittings for all vacuum line
Fueling, EMS, etc:
Hondata KPRO w/ PWM boost control
Golden Eagle fuel rail, Aeromotive FPR
Injector Dynamics ID2000cc injectors
Dual Bosch 044 pumps with 40amp Boost-a-pump
Stock sumped gas tank
Car is tuned on 92 pump gas on 14lbs making 530whp with a soft conservative tune. Also have a conservative E85 tune around 25psi made roughly 720whp
Car is completely legal and up to date to go 8.50 and slower. Car has been down the track less then 20 passes.
I'm in no real rush to sell the car kinda up in the air if I want to or not. But if the right buyer comes along an gives me my asking price then its theres and I'd also like the car to go to a good home.
Asking $27k Firm
(Witch I believe is reasonable considering what it cost to build a car like this)
Car is located in Reno,NV
Contact # (775) 527-9523
Car:
1992 Honda Civic
10 point molly cage
Deist window net
Stroud parachute
2 Kirky seats w/seat covers
Gforce belts
Cnc staging brake
FabC drag wing
Source Racing 3 piece front
Cf hood
Arev Motorsports dress up engine bay kit
Engine:
Golden Eagle sleeved & O-ringed K20a2 block
86mm Custom Arias Pistons w/upgraded wrist pins
Manley Turbo tuff rods
ACL Race bearings
Stock port K20a2 head, Ferrea Comp Plus valves
Prayoonto racing Stg 2 all motor cams, Supertech valvetrain*
Golden Eagle IM, SpeedFactory Thermal IM gasket
70mm Shunk2 TB
ATI race damper
Drivetrain/Chassis:
Gforce Dog Box w/Mfactory lsd
Dynamic Performance Scattershield
Dss 5.9 axles
Ktuned Traction Bar
Solid lower bushings up front
Mfactory lower ball joints
Competition Clutch Twin Disc
Hasport Racing solid billet mounts
Ktuned Billet shifter box w/welded shifter
Ktuned 5th gear lockout
Ktuned race cables
Blox drag coilovers
Belak Industries 13x9 single beadlock OG series front and 15x4 OG series rears
M&H 24.5 / 9.5 / 13
M&H 26 / 4.5 / 15
Also comes with black rota gt3's with brand new M&H G60's
Turbo setup:
Precision Turbo Billet PT6766 open .96a/r T4 journal bearing
SpeedFactory Sidewinder*
Single Tial 60mm WG, Tial Q BOV
Treadstone 1000hp intercooler
Push to lock fittings for all vacuum line
Fueling, EMS, etc:
Hondata KPRO w/ PWM boost control
Golden Eagle fuel rail, Aeromotive FPR
Injector Dynamics ID2000cc injectors
Dual Bosch 044 pumps with 40amp Boost-a-pump
Stock sumped gas tank
Car is tuned on 92 pump gas on 14lbs making 530whp with a soft conservative tune. Also have a conservative E85 tune around 25psi made roughly 720whp
Car is completely legal and up to date to go 8.50 and slower. Car has been down the track less then 20 passes.
#15
Honda-Tech Member
iTrader: (2)
Re: May FS Thread
92 hatch
Built Gsr eagle/cp
Supertech springs and retainers
Garrett 60-1
Hks Bob
Rc1000 injectors
Wally 255 pump
Hondata s300
Edelbrock intake mani
Precision 750hp intercooler
DSS 3.9 axles
Gsr trans (shifts smooth as butter)
Comp twin disc (w/pedal stop)
Brand new cf hood and trunk
Cf wrapped CCC drag wing
Si wheels great tread
Car is tuned on pump gas 405hp runs 11.4 @121 mph
C16 tune 625hp 10.2 @ 141
Car is street able has heat , wiper motors (no arms though) no carpet or rear seats (I have both just not installed)
Will to sell for 7,000 I'd move on the price a little but not much. Trade for???? No junk. Older muscle car? Newer car ?
I have TONS of BRAND new parts that would easily make this a 9sec car.
DSS 5.9
Brand new twin disc
Back up Gsr trans w/cuff
Brand new 6266
Sleeved Carrillo/cp motor
Lenso slick/skinny setup
Afi big bore intake manifold
Sheepy top mount manifold
Also have a 18 foot car hauler could be added in for the right deal.
Please note this car HAS been tracked . I have done an oil change after every weekend the car has been run and plugs checked and changed as well.
I will not sell anything until the car is sold I won't respond to messages about parts
nc6 by 93 red ls, on Flickr
nc5 by 93 red ls, on Flickr
nc4 by 93 red ls, on Flickr
nc3 by 93 red ls, on Flickr
nc2 by 93 red ls, on Flickr
nc1 by 93 red ls, on Flickr
IMG_20150318_161116522 by 93 red ls, on Flickr
IMG_20150318_161054541 by 93 red ls, on Flickr
IMG_20150318_161027385 by 93 red ls, on Flickr
Built Gsr eagle/cp
Supertech springs and retainers
Garrett 60-1
Hks Bob
Rc1000 injectors
Wally 255 pump
Hondata s300
Edelbrock intake mani
Precision 750hp intercooler
DSS 3.9 axles
Gsr trans (shifts smooth as butter)
Comp twin disc (w/pedal stop)
Brand new cf hood and trunk
Cf wrapped CCC drag wing
Si wheels great tread
Car is tuned on pump gas 405hp runs 11.4 @121 mph
C16 tune 625hp 10.2 @ 141
Car is street able has heat , wiper motors (no arms though) no carpet or rear seats (I have both just not installed)
Will to sell for 7,000 I'd move on the price a little but not much. Trade for???? No junk. Older muscle car? Newer car ?
I have TONS of BRAND new parts that would easily make this a 9sec car.
DSS 5.9
Brand new twin disc
Back up Gsr trans w/cuff
Brand new 6266
Sleeved Carrillo/cp motor
Lenso slick/skinny setup
Afi big bore intake manifold
Sheepy top mount manifold
Also have a 18 foot car hauler could be added in for the right deal.
Please note this car HAS been tracked . I have done an oil change after every weekend the car has been run and plugs checked and changed as well.
I will not sell anything until the car is sold I won't respond to messages about parts
nc6 by 93 red ls, on Flickr
nc5 by 93 red ls, on Flickr
nc4 by 93 red ls, on Flickr
nc3 by 93 red ls, on Flickr
nc2 by 93 red ls, on Flickr
nc1 by 93 red ls, on Flickr
IMG_20150318_161116522 by 93 red ls, on Flickr
IMG_20150318_161054541 by 93 red ls, on Flickr
IMG_20150318_161027385 by 93 red ls, on Flickr
#16
Honda-Tech Member
Join Date: Sep 2002
Location: 670 all day
Posts: 1,187
Likes: 0
Received 0 Likes
on
0 Posts
Re: May FS Thread
Location: Vancouver WA 98683
Contact: j.san-juan@students.clark.edu
Text: (360)783-7482
Paypal Verified
Price: $800 shipped + PP fees
OR
Price: $750 picked up
Intercomp EZ Weigh Scales
Contact: j.san-juan@students.clark.edu
Text: (360)783-7482
Paypal Verified
Price: $800 shipped + PP fees
OR
Price: $750 picked up
Intercomp EZ Weigh Scales
- PN#170125
- Model#SW500
- Gently used and in great condition
- 15" x 15" x 2.5" (381 x 381 x 64mm) Billet Scale Pads
- 1,500 lb (700 kg) Pad Capacity
- 6,000 lb (2,800 kg) System Capacity
- Cabled Indicator with Case
- Fresh 9-Volt Battery installed
- 12V AC adapter included
- Instruction manual included
#17
Honda-Tech Member
Re: May FS Thread
F/S: 15x8 and 15x4 CCW LM20 street/drag pack. Centers are done in a shot peened/textured bright clear anodize with polished lip and inner barrels. Tires are basically new (maybe 50 miles) 235/60-15 M&H street & strip up front, 24x3.6-15 M&H skinny's out back. Wheels will include center caps, and lug nuts. Clears up to GSR brakes
$2000 plus shipping with tires. $1600 plus shipping without. FIRM.
USED: 24.5x9-13 MT slicks. Still a decent bit of life left, maybe 30 or so passes on them. Still cut 1.6x 60' when taken off
SOLD
http://i4.photobucket.com/albums/y10...psu02navrb.jpg
http://i4.photobucket.com/albums/y10...psxmjjlika.jpg
MoTeC M4 box (unlocked: Data logging, Lambda & Advanced Tuning)
M&W Pro14
Motec ignition expander
T1 cam trigger (Including one black Golden Eagle cam gear with magnets *ARP hardware not included*)
CBR coils
Motec engine harness (B-Series)
$2500 plus shipping. (NOT SPLITTING UP) FIRM
$2000 plus shipping with tires. $1600 plus shipping without. FIRM.
USED: 24.5x9-13 MT slicks. Still a decent bit of life left, maybe 30 or so passes on them. Still cut 1.6x 60' when taken off
SOLD
http://i4.photobucket.com/albums/y10...psu02navrb.jpg
http://i4.photobucket.com/albums/y10...psxmjjlika.jpg
MoTeC M4 box (unlocked: Data logging, Lambda & Advanced Tuning)
M&W Pro14
Motec ignition expander
T1 cam trigger (Including one black Golden Eagle cam gear with magnets *ARP hardware not included*)
CBR coils
Motec engine harness (B-Series)
$2500 plus shipping. (NOT SPLITTING UP) FIRM
Last edited by sohc95vtec-t; 05-22-2015 at 05:50 AM.
#18
Honda-Tech Member
Join Date: Nov 2005
Location: East Coast
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Re: May FS Thread
Weld Alumastar 15x9" polished wheels
5x114.3 bolt pattern / 5" backspacing
Bogart Force5 15x4" polished wheels
5x114.3 bolt pattern /2" backspacing
M&H 8.5/23-15 Slicks / One pass made!
M&H 3.6/24-15 Slicks / Brand New!
$1200 takes it all
5x114.3 bolt pattern / 5" backspacing
Bogart Force5 15x4" polished wheels
5x114.3 bolt pattern /2" backspacing
M&H 8.5/23-15 Slicks / One pass made!
M&H 3.6/24-15 Slicks / Brand New!
$1200 takes it all
#20
Honda-Tech Member
Join Date: Jan 2004
Location: somewhere, CT, USA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Re: May FS Thread
What's up hondatech up for sale is spinwerkes 5x114.3 15x8 aluminum rims, these were on my civic with type r spindles and fit perfect! No spacers required they have m&h 24.5x15x8 slicks with 15 passes at most still plenty of life 650obo +shipping from ct call or text 860 395 9880
Last edited by civichbb18; 05-21-2015 at 10:24 AM.
Thread
Thread Starter
Forum
Replies
Last Post