Kings Performance S2K NEW Numbers 9's on Drag Radials+StockMotor+KP Stage 1 turbo kit
#1
Honda-Tech Member
Thread Starter
Kings Performance S2K NEW Numbers 9's on Drag Radials+StockMotor+KP Stage 1 turbo kit
We are extremly happy with the results of this past weekend!!!
A couple month back we parted out the car & sold some of the old set up. We had planned to build a Road race car, but due to the fact that we are Drag junkies :LOL: we decided to install a 100% F22C Stock Engine to push it & see how much power the KP Stage 1 turbo kit can make. After doing some turbo & tuning testing we finalize the project with some REALLY good results.
Here is the OLD SET UP:
-GE Sleeved F20C block w/ O-ring
-CP Pistons w/ Upgraded wrist pins
-Pauter Rods
-KP Race head
-FBM H11 head studs
-KP Stage 3.5 turbo kit w/ Precision HP-6265 Billet ball bearing T4 .81 A/R turbo
-KP 8.8 Diff kit
-KP/Frana dog box gear box
-CC Twin disc clutch kit
-AEM V2 ems w/ Boost by gear
-And a couple other goodies...
Highest Horsepower with Old set up 835whp & 500'sh tq
E85 Ethanol
Best E/T: 9.9 @ 142mph (755whp @ 28psi)
Weight: 3,050 lbs w/ driver
Tires: M/T 255/50/16 Drag Radials on AP1 wheels
NEW SET UP:
-100% Stock Block
-100% Stock Head w/ SuperTech Dual springs & Ti-Retainers kit
-100% Stock Cams
-FBM H11 head studs
-Kings Performance Stage 1 turbo kit (T3 Log Manifold) w/ Precision HP-6266 Billet ball bearing T3 .82 A/R :p
-HKS 3" exhaust
-Same KP fuel system
-AEM V2 ems w/ Boost by gear
-V160 transmission
-FBM V160/S2k adapter kit
-KP 8.8 diff kit
-Clutch Master Twin ceramic clutch kit
-Clutch Master flow control valve
Horsepower with NEW set up 722whp & 535tq @ 32psi
E85 Ethanol
Weight: 3,095 lbs w/ driver
Tires: M/T 275/50/15 Drag Radials on Weld 15x9 wheels :p
1st pass on the new set up:
2nd pass:
3rd pass:
4th pass letting off on 4th, because of problems: :crycry:
If you look @ the 60 foot, 1/8 E/T & MPH on the previous passes, we were definitely on a 9.6-9.7 pass @ 147-148mph :argh:
The only thing we change in between passes was the 2step & Rev Limiter.
I will like to thank the main people behind this project:
-Jose "Pepo" Besosa @ Red Star Motoing for all his expertise, technical support & amazing driving!
-Sergio @ Kings Performance for the tuning
-Victor "Fast Fernan" @ Kings Performance for never saying NO!
-Ricky "POP" @ Kings Performance Shop
-AEM Power
-Precision Turbo for the sickest turbo period!
-Clutch Masters
-Full Blown Motorsports
-S2000store.com
-The entire crew @ Kings Performance for all the hard work & dedication!
And last but not least all our loyal customers that support us over the years & allow us to do what we do, we couldn't do it with out you guys!
After everything we have done, we have proven that WE ARE THE KINGS !!! :LOL:
Video will be up soon!!!
Thanks & enjoy,
Fernando @ Kings Performance
A couple month back we parted out the car & sold some of the old set up. We had planned to build a Road race car, but due to the fact that we are Drag junkies :LOL: we decided to install a 100% F22C Stock Engine to push it & see how much power the KP Stage 1 turbo kit can make. After doing some turbo & tuning testing we finalize the project with some REALLY good results.
Here is the OLD SET UP:
-GE Sleeved F20C block w/ O-ring
-CP Pistons w/ Upgraded wrist pins
-Pauter Rods
-KP Race head
-FBM H11 head studs
-KP Stage 3.5 turbo kit w/ Precision HP-6265 Billet ball bearing T4 .81 A/R turbo
-KP 8.8 Diff kit
-KP/Frana dog box gear box
-CC Twin disc clutch kit
-AEM V2 ems w/ Boost by gear
-And a couple other goodies...
Highest Horsepower with Old set up 835whp & 500'sh tq
E85 Ethanol
Best E/T: 9.9 @ 142mph (755whp @ 28psi)
Weight: 3,050 lbs w/ driver
Tires: M/T 255/50/16 Drag Radials on AP1 wheels
NEW SET UP:
-100% Stock Block
-100% Stock Head w/ SuperTech Dual springs & Ti-Retainers kit
-100% Stock Cams
-FBM H11 head studs
-Kings Performance Stage 1 turbo kit (T3 Log Manifold) w/ Precision HP-6266 Billet ball bearing T3 .82 A/R :p
-HKS 3" exhaust
-Same KP fuel system
-AEM V2 ems w/ Boost by gear
-V160 transmission
-FBM V160/S2k adapter kit
-KP 8.8 diff kit
-Clutch Master Twin ceramic clutch kit
-Clutch Master flow control valve
Horsepower with NEW set up 722whp & 535tq @ 32psi
E85 Ethanol
Weight: 3,095 lbs w/ driver
Tires: M/T 275/50/15 Drag Radials on Weld 15x9 wheels :p
1st pass on the new set up:
2nd pass:
3rd pass:
4th pass letting off on 4th, because of problems: :crycry:
If you look @ the 60 foot, 1/8 E/T & MPH on the previous passes, we were definitely on a 9.6-9.7 pass @ 147-148mph :argh:
The only thing we change in between passes was the 2step & Rev Limiter.
I will like to thank the main people behind this project:
-Jose "Pepo" Besosa @ Red Star Motoing for all his expertise, technical support & amazing driving!
-Sergio @ Kings Performance for the tuning
-Victor "Fast Fernan" @ Kings Performance for never saying NO!
-Ricky "POP" @ Kings Performance Shop
-AEM Power
-Precision Turbo for the sickest turbo period!
-Clutch Masters
-Full Blown Motorsports
-S2000store.com
-The entire crew @ Kings Performance for all the hard work & dedication!
And last but not least all our loyal customers that support us over the years & allow us to do what we do, we couldn't do it with out you guys!
After everything we have done, we have proven that WE ARE THE KINGS !!! :LOL:
Video will be up soon!!!
Thanks & enjoy,
Fernando @ Kings Performance
#3
Honda-Tech Member
Thread Starter
#4
Honda-Tech Member
iTrader: (2)
Re: Kings Performance S2K NEW Numbers 9's on Drag Radials+StockMotor+KP Stage 1 turbo
Great car man! I'm curious why your old setup was a fully built motor with ported head etc and your new setup is a bone stock motor with springs and retainers... Did you have something to prove?
#5
Honda-Tech Member
Join Date: Nov 2004
Location: conway, ar, us
Posts: 820
Likes: 0
Received 0 Likes
on
0 Posts
Re: Kings Performance S2K NEW Numbers 9's on Drag Radials+StockMotor+KP Stage 1 turbo
wow! that's awesome! really sucks you had to let off that last pass though! :/
#6
Honda-Tech Member
Re: Kings Performance S2K NEW Numbers 9's on Drag Radials+StockMotor+KP Stage 1 turbo
Just love your Art Work you do it like it should!
Thumps up for all Kings Crew
Thumps up for all Kings Crew
#7
Honda-Tech Member
Thread Starter
Re: Kings Performance S2K NEW Numbers 9's on Drag Radials+StockMotor+KP Stage 1 turbo
Last edited by Kings Performance; 05-07-2012 at 05:12 PM. Reason: typo
Trending Topics
#9
Honda-Tech Member
Thread Starter
#13
Re: Kings Performance S2K NEW Numbers 9's on Drag Radials+StockMotor+KP Stage 1 turbo
Congrats on the 9 second pass's.. Thats amazing with stock internals.. You guys plan on building the motor and turning the boost up run slicks etc?
Thread
Thread Starter
Forum
Replies
Last Post
Kings Performance
Honda S2000
24
11-20-2012 07:16 AM
Retired
Classifieds: Forced Induction
2
06-04-2004 11:42 AM
turbo Si
Forced Induction
11
04-04-2003 03:28 PM