94boostedhatch

I want to get a set of drag radials for my 94 hatch with 3 piece front to use for Dyno an transport I have a set of 15x8 rota slips 40 offset is anyone running 275/55r15 Mickey thompsons I think they would fit but I don't want rubbing issues

94boostedhatch

*275/50R15 part number 3753r

DA9_LEO

You should be fine with clearance as long as alignment is right and especially with 3 piece front end

G-FX

i just brought some rota slipstreams 15x8 +38.. I used the offset calc with my 8.5 wide street rims, with 23 offset and 225 tires... based on that difference i dont see how its going to work with the knuckle.. so Ive ordered 25mm spacers just in case

kr3w108

I know that MT recommends using a min of a 9" wide rim for the 275.

eg:R

I pull the trigger on these tires and the ride height is high on the front end. What height is everyone running with these tires or on any taller tires(26in) . Should I equally balance the ride height the same for front and rear? Right now my front is higher. I'm trying to make height adjustment now before doing my alignment tomorrow

kr3w108

for proper weight transfer raising the rear will be better.