whatVTEC

what does cryo do? Is it only needed for high horsepower cars? If i replace the parts needed and then get cryo done does it make it stronger to prevent it from happening? Sorry for the questions, but I just wanna understand what the cryotreatment is for.

JICsube

kinda off topic but you get the point. they cryo treat the sti ra gears from ralli spec and the subaru guys have had good luck with it with 350plus whp. only one guy known to break so far and i think he was running like 450whp.. so it must help

E-Town4229

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIXTYdashONE &raquo;</TD></TR><TR><TD CLASS="quote">Am i the only one here that thinks this is overkill?

I havent had a bit of problems with my tranny grindin, not ever, once... </TD></TR></TABLE>

if you drive your car ALOT and beat on it ALOT. you can wear out the synchros and start to grind gears. fairly recently it was common to see relativly stock 99-00 Sis coming in with transmission problems. just about every single one had a bad 3rd gear synchro due to severe abuse (evidenced by the bald front tires although there are the exceptions where maybe its just a bad driver). repeated high rpm power/speed shifts will wear out synchros. the solution is products like gear speed or libertys upgrades.
-Roger

V-SPEC 1

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by whatVTEC &raquo;</TD></TR><TR><TD CLASS="quote">what does cryo do? Is it only needed for high horsepower cars? If i replace the parts needed and then get cryo done does it make it stronger to prevent it from happening? Sorry for the questions, but I just wanna understand what the cryotreatment is for. </TD></TR></TABLE>

Cryo treating is for wear resistance on parts. It's not really making it stronger, it's like an antiwear process.

V-SPEC

TEAMGENDAI

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostedb20vtec &raquo;</TD></TR><TR><TD CLASS="quote">

Cryo treating is for wear resistance on parts. It's not really making it stronger, it's like an antiwear process.

V-SPEC</TD></TR></TABLE> EXACTLY

whatVTEC

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SEFIxCivic &raquo;</TD></TR><TR><TD CLASS="quote">anyone in the bay area need your tranny parts cryoed? i can help u out.</TD></TR></TABLE>

How much?

0project dc2

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by whatVTEC &raquo;</TD></TR><TR><TD CLASS="quote">

How much? </TD></TR></TABLE>

same here, also is it better to have the tranny apart or deos ti not matter ?

SEFIxCivic

the gears must be taken apart. if you bring me the tranny i can disassemble it for u as well as inspect it for wear

0project dc2

iTrader: (1)

i wanted to shotpeen and cryotreat a SR20 FWD tranny.

SEFIxCivic

i dont have experience taking apart a sr20 transmission. if you take it apart i can get your stuff cryoed.

E-Town4229

forward motion did some cryo work on an sr20 trans. although i think you have to send them the parts.
-Roger

0project dc2

iTrader: (1)

price ?

whatVTEC

so how much would it be for disassemble,inspect and cryotreating?
Do you work out of R crew? If so can you also get me a price for Type R LSD and installation in a GSR tranny.
Thanks

SEFIxCivic

call dan tomorrow on the disassembly, inspection, lsd, and install.

if you can do the cryotreat within this week i can get it done for $200 bucks. otherwise it will be $250.

thats for the final drive, 1-5 gears, mainshaft, countershaft, shift forks.

hybrid901

I had mine cryoed at http://www.deepfreezecryo.com

PM-Performance

WOW&gt; they said Like $10 a piece to do the syncros, and if i wanted my whole gear box done it would be $125. THATS NICE!!!!!