poncec23

Hey all
I'm building up my h22 now. The bottom end is on the way to golden eagle now. I'm planning on running the garret GTX3076 with ID 2000'S injectors. My question is what fuel pump should I be running? I'd like to keep the intank theme uf possible and I'm currently running a walboro 255. This will be on pump gas. Also what wastegate should I run? Tial 44? Dual tial? Any help would be great. Its going in my 99 prelude

turbociv910

pump gas 600hp gtx3076? Pull the reins back and do some more research.

A walbro 255 can just about make what ever you want on pump gas. A new Walbro 400 will definitely be able to.

poncec23

I see the gtx35 would be better suited.

SP GARAGE

iTrader: (1)

We did 600+ on aem 320 lph and Bosch 1600 injectors

95whiteeg6

I did 620 on a single 400/stock lines and 1600s on e85
single 44mm tial gate

poncec23

Amazing info thanks guys! So opinion time gtx3576 or pt6262 ball bearing? It will see track use but daily for sure. I drive with a light foot (granny style) on the street so a late boost climb is ok.

Julio@Bisimoto

Been very happy with AEM Electronics 320LPH pump and 2200cc injectors. We did 700+ with a turbo D16z6 Wagon, pump gas and AEM water/methanol kit.

95whiteeg6

that's what i made the 620 on was a 6262jb

Rtype16

AEM 320lph fuel pump and if you are eventually gonna go E85 I know they just released a new version of the same pump that is 100% compatible with Ethanol, Methanol and Gasoline.

poncec23

yeah just got off the phone with my tuner and he reccomended a 320lph deatschwerks fuel pump. deatschwerks 1300cc injectors and a garrett gtx3576 .82ar to get me close to the 600hp mark. and said water/meth would def get me over. thank you guys and girls for all the advice as most of it was spot on.

poncec23

any suggestons on throttle body sizes?

h-duced

Last 5 years was on a stock sleeve H-series. 1300cc deash werk injectors, walbro 400 pump, tuned on hondata with a Borg Warner s259 70ar. Put down 559whp and 420tq. 74mm skunk2 throttle body ge intake.