SRS light stays on after alarm install
#1
Junior Member
Thread Starter
Join Date: Jul 2004
Location: NY
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
SRS light stays on after alarm install
Does anyone know why would the SRS light stays on after I installed a viper alarm? fcm told me to disconnect the battery(reset) or unplug the alarm brain until battary is reconnected but they they dont seem to work
fyi, car is a 96 Del Sol, alarm:viper 5002 + back up battery+ back up siren.
fyi, car is a 96 Del Sol, alarm:viper 5002 + back up battery+ back up siren.
#2
Old Fart
Join Date: May 2004
Location: kelowna, bc, canada
Posts: 26,173
Likes: 0
Received 14 Likes
on
14 Posts
Re: SRS light stays on after alarm install
Make sure you have not left an airbag plug unplugged or that the SRS fuse is blown.
Disconnecting the batt. neg.(-) for a few min. should "reset" the ECU/ECM and turn out the light if the SRS system is just latched up. 94
Disconnecting the batt. neg.(-) for a few min. should "reset" the ECU/ECM and turn out the light if the SRS system is just latched up. 94
#4
Honda-Tech Member
iTrader: (1)
Join Date: Oct 2005
Location: 99 probs but a stolen car aint 1, ca, cerritos/fullerton
Posts: 9,716
Likes: 0
Received 3 Likes
on
3 Posts
Re: SRS light stays on after alarm install
you must of unplugged something. I was going to right it out but here a clear page on how to reset the srs light. If there is a problem the light will come back on. Follow fcm advice then proceded to this.
http://www.geocities.com/myintegra96/srs.html
http://www.geocities.com/myintegra96/srs.html
#5
Junior Member
Thread Starter
Join Date: Jul 2004
Location: NY
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Re: SRS light stays on after alarm install
It worked.
So if theres a malfunction, the SRS light will come back on rite away, correct?
Thanks for your help!!
So if theres a malfunction, the SRS light will come back on rite away, correct?
Thanks for your help!!
#6
Honda-Tech Member
iTrader: (1)
Join Date: Oct 2005
Location: 99 probs but a stolen car aint 1, ca, cerritos/fullerton
Posts: 9,716
Likes: 0
Received 3 Likes
on
3 Posts
Re: SRS light stays on after alarm install
Yes. Go back and make sure you did not tag ANY WIRES PERIOD INTO THE SRS HARNESS THATS WRAPPED IN YELLOW TAPE.
Thread
Thread Starter
Forum
Replies
Last Post
aowtkm
Audio / Security / Video
2
11-28-2011 03:44 AM