blasterman87

how can i wire the usual kill switch (to either fuel pump or starter wire) that when the key is turned to "Start" with the kill switch off it sets off an alarm sound? how would this be done and whare would i get the speaker/noise box? i think it would be nice for a thief to get in my car, turn over the key and BEEEEEEEPPPP!!! drawing attention to himself, and to top it off the car didnt even start...

fcm

Easy enough, install a SPDT switch on the ground for the PGM-FI Main Relay, from ground into switch common, one output from switch will go to PGM-FI Main Relay the other output will go to #85 of SPDT relay, connect #30 to chassis ground and #87 to horn lead at steering column harness and then connect the starter lead, [parallel] to #86.

When switch is in one direction a ground is supplied to the PGM-FI Main Relay so it works, when switch is the other way the ground is supplied to the relay so if the ign. is turned to start the relay will energize and supply the horn with a ground, BEEEEEEEPPPP.

Use 2 relays or a DPDT relay and you can have both PGM-FI Main Relay kill and starter cut and horn honk. 94

blasterman87

ahh... never thaught of using the horn, sounds kinda complicated whare can i find the relays?

fcm

It's not at all complicated, you can get the relays at any car parts store or any car audio/security store or at a 100,000 places online... http://www.google.ca/search?sourceid...&q=spdt+relays 94