Dome light supervision relay question, bad place for a diode?
#1
Honda-Tech Member
Thread Starter
Dome light supervision relay question, bad place for a diode?
I wired up my relay but my dome light supervision doesn't work. Dome light is active and working when door is open or turned on manually. I hear the relay click 30 seconds after ignition disengages, so it is functioning, ground is good, power is good.
I spliced the dome light wire, coming off the relay, into the door trigger wire coming off the alarm. there is a diode on it as my trunk trigger shares that wire as well (it also has a diode).
Is that diode my problem? Should I tap in so it isn't isolated by the diode, but keep the alarm's door trigger wire isolated???
Alarm: Viper 5900
Thanks.
I spliced the dome light wire, coming off the relay, into the door trigger wire coming off the alarm. there is a diode on it as my trunk trigger shares that wire as well (it also has a diode).
Is that diode my problem? Should I tap in so it isn't isolated by the diode, but keep the alarm's door trigger wire isolated???
Alarm: Viper 5900
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
pudder
Honda Civic / Del Sol (1992 - 2000)
1
12-31-2007 11:21 AM