Diode - Car Alarm - Trigger Isolation
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2007
Location: Killingworth, CT, USA
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Diode - Car Alarm - Trigger Isolation
I need to tie togher my hood, trunk, and battery back-up and isolate them as described in suspendedhatch's write up on install. I do not know which diode I need to buy. Is the one I need on this page:
http://www.partsexpress.com/we..._ID=3
or can someone provide a detailed description so that I may find it at Radio Shack. I was there early and they only had one for 12V applications but it was rated for 21mA, I read somewhere that I need a 3 A diode, and I assume that it needs to be for 12V.
Terry
http://www.partsexpress.com/we..._ID=3
or can someone provide a detailed description so that I may find it at Radio Shack. I was there early and they only had one for 12V applications but it was rated for 21mA, I read somewhere that I need a 3 A diode, and I assume that it needs to be for 12V.
Terry
#2
Honda-Tech Member
Re: Diode - Car Alarm - Trigger Isolation (95SE)
almost any diode work. Go to radio shack just buy a standard 1 amp diode.
Model: 1N4003
Catalog #: 276-1102
Model: 1N4003
Catalog #: 276-1102
#3
Honda-Tech Member
iTrader: (1)
Join Date: Oct 2005
Location: 99 probs but a stolen car aint 1, ca, cerritos/fullerton
Posts: 9,716
Likes: 0
Received 3 Likes
on
3 Posts
Re: Diode - Car Alarm - Trigger Isolation (95SE)
what kind of alarm? I don't recommend tieing the back up battery to the hood pin or trunk pin. It should be on its own trigger. Put the hood pin on the trunk pin or door pin. And the back up battery on the hood pin.
#4
Honda-Tech Member
Thread Starter
Join Date: Jan 2007
Location: Killingworth, CT, USA
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Re: Diode - Car Alarm - Trigger Isolation (wrx-killer-Sti-eater)
Viper 1002
Okay, I can do that. I can tie Hood/Trunk together and Use the Auxillary harness for the BB. I was not planning on using the Aux harness at all, but no big deal.
Okay, I can do that. I can tie Hood/Trunk together and Use the Auxillary harness for the BB. I was not planning on using the Aux harness at all, but no big deal.
#5
Old Fart
Join Date: May 2004
Location: kelowna, bc, canada
Posts: 26,173
Likes: 0
Received 14 Likes
on
14 Posts
Re: Diode - Car Alarm - Trigger Isolation (95SE)
Use the blue, [H1/7] for the trunk.
Use the gray, H2/2 for the hood pin and the backup batt., the hood pin has no load on it like the trunk/hatch, [trunk/hatch light] so no diodes are needed. 94
Use the gray, H2/2 for the hood pin and the backup batt., the hood pin has no load on it like the trunk/hatch, [trunk/hatch light] so no diodes are needed. 94
Thread
Thread Starter
Forum
Replies
Last Post
rdssk8rcs1
Audio / Security / Video
19
05-24-2007 02:18 PM