clifford 50.5x Remote ran out of batteries and now will not resync
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Location: Lincoln, NE, USA
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
clifford 50.5x Remote ran out of batteries and now will not resync
I put a Clifford 50.5x alarm system into my car and it's been working great. However the other day my remote ran completely out of batteries, and it wasn't till the next morning that I was able to put a new one in. The remote no longer communicates with the alarm, in the manual it says to press the lock button several times within close range of the system. I tried that and nothing, took out half of my interior to where I left the brain and pulled the plug, let it sit overnight, and still nothing.
Anyone had this happen or know how I can get this remote working again?
Anyone had this happen or know how I can get this remote working again?
#2
Honda-Tech Member
Join Date: Jun 2008
Location: Cheney, WA, USA
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Re: clifford 50.5x Remote ran out of batteries and now will not resync (dad0c402)
You have to re-learn the remote using the key and valet switch. Its in the manual..
#3
Honda-Tech Member
Join Date: Mar 2004
Location: socal
Posts: 928
Likes: 0
Received 0 Likes
on
0 Posts
Re: clifford 50.5x Remote ran out of batteries and now will not resync (salomon16)
find your valet switch. turn the ignition to the on position. press and release and then press and hold the button. the alarm should chirp. press the lock button on the remote and the alarm should chirp again. turn off ignition
Thread
Thread Starter
Forum
Replies
Last Post
Dr. Willy
Audio / Security / Video
1
08-11-2008 12:53 AM
mickey513
Audio / Security / Video
8
07-09-2003 03:45 AM