CanadianEF9

i just picked up another b16 and was told that it had skunk2 pro1 cams and i want to find out for sure. and all i know rite now till i pull them tommorrow is when i pulled the dizzy off it was engraved p2t so if anyone can help me it would be awesome

CanadianEF9

59 viewsand nobody knows nothing?

Skunk2Brian

P2+ are acceptable etchings for Pro Series Stage 2 camshafts.

CanadianEF9

ok thank you.... will these work fine with a stock bottom end b16a? and will they work with stock valve springs? i know its better to use aftremarket springs just dont have the funds rite now but have the cams and would like to use them

negusjuda

no and no

00Red_SiR

modified...lol

nus_dogg

Lol.

OP, unless you don't care about your motor grenading on you then feel free. But it's a must to run the valvetrains with skunk2 cams; except, for the tuners stage 1 which is highly recommended still.

CanadianEF9

alright i didnt think i could just thought i would ask.... so what comp do you need to run these cams?

negusjuda

at least 11:1

00Red_SiR

It depends on the displacement of the motor. Probably 13:1 or higher on a B16, 12:1 on a 1.8L and ideally 11:1 on a B20 or larger.

CanadianEF9

alright thanks for all the help. i think im just gonna sell them as i dont want to go that high of comp and maybe just get some itr's