2 clips, one on each side of the car at the bottom of the rear seats. take those out, and then push the two rear seats apart and comes right out...once those are out..there's a 10mm bolt holding the bottom parts down..take that out and it will all come out.
1st) how would you be able to see the 10mm screw if you haven't taken the back part of the rear seats out yet? I just removed mine, 10 min ago, and I couldn't see it...
2nd) If you lower the back part of the rear seats and look to the outside of each seat... They have metal rods which connect to the side of the car, on each metal rod is a plastic clip to hold it in place which is what you gotta pop out.
the 10mm screw i'm talking about was under the carpet on the back. i had remove the carpet when i was looking for screws that holds the seats. the two clips are the same one i saw too, so now i know how to do it.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.