LU

im doing ls vtec in my teg but some people are telling me i need to buy new pistons and rods, rod bolts. They say that the piston will hit the valves. so thats my question do i really need it or not??????????

ProjectDarkBlack

its all a big equation, but if you get the right parts you dont HAVE to. many people will tell you many different things you dont need to upgrade the rods and bolts but
you could run into problems later on depending on what rpms you shift at

LU

i was thinking to set up vtec at 4500 or 4800 and shift at 7000 and people also tell me that vtec controller isnt good for LS VTEC

Quiks66

If you plan on revving past the stock rev-limit (but not past 8000-8500) simply upgrading the rod bolts and shotpeening the stock LS rods should be enough. Upgrading your pistons to bump up the compression will help you gain HP too, but is not entirely necessary unless you're trying to build a drag beast. Do some searching on HT and you'll find a lot of great info

LU

what is the horse power u think i would be at and what u would think i can run at the track?? also would a 75 or 50 be good for ls vtec ???

marsbike

the brand new Sport Compact Car has a great writeup in the mag. Be sure to get the one with the carbon SRT-4 on the cover. Great instructions with it. They have a complete part list on the first few pages of the article.

HARI.

this kit should also help
https://honda-tech.com/zerothread?id=956142

SlowDC4

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LU &raquo;</TD></TR><TR><TD CLASS="quote">what is the horse power u think i would be at and what u would think i can run at the track?? also would a 75 or 50 be good for ls vtec ???</TD></TR></TABLE>you're obviously not educated enough to organize something like this yourself..the questions that you just asked remind me of something a middle school student would ask..if you insist on going through with this, have a good shop do it and don't try to add any of your own input to the project

HARI.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SlowDC4 &raquo;</TD></TR><TR><TD CLASS="quote">you're obviously not educated enough to organize something like this yourself..the questions that you just asked remind me of something a middle school student would ask..if you insist on going through with this, have a good shop do it and don't try to add any of your own input to the project</TD></TR></TABLE>

you gotta start somewhere, right?? let him learn on his own

LSvtec03

jebus. there's been like 20 lsvtec ? pages since yesterday.

the only lsvtec page you'll ever need

gt35r

dont build a lsvtec...buy mine